<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
try changing cm service parameter "Enable Display IE in Codeset 6".<br>
<br>
/Wes<br>
<br>
<br>
<br>
On Thursday, February 19, 2009 5:40:06 PM, James Jung
<a class="moz-txt-link-rfc2396E" href="mailto:James.Jung@telecom.co.nz"><James.Jung@telecom.co.nz></a> wrote:<br>
<blockquote
cite="mid:48EF47CFE6435A4C8890DB8FDA18EF031E9BC1@AKEXBE02.telecom.tcnz.net"
type="cite">
<pre wrap="">Thanks for the comments guys.
Anyone knows about " Codeset 6 IE 0x28 i = 'Russel McAuliff' "
?
What does it do?
Does MGCP support this? Because with H323 it worked but with mgcp, it
works only if there's calling number present.
I saw two types.
1. Both calling number and name is seen on Q931. Then, Cisco IP phone
displays only calling name.
2. No calling number is seen and only calling name is seen on Q931.
Then, Cisco IP phone displays nothing.
I don't know why calling name is not displayed.
________________________________
From: Jason Aarons (US) [<a class="moz-txt-link-freetext" href="mailto:jason.aarons@us.didata.com">mailto:jason.aarons@us.didata.com</a>]
Sent: Thursday, 19 February 2009 16:21
To: James Jung; <a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
Subject: RE: [cisco-voip] Avaya - CCM v5 Integration
I believe you need to use QSIG over MGCP.
From: <a class="moz-txt-link-abbreviated" href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a>
[<a class="moz-txt-link-freetext" href="mailto:cisco-voip-bounces@puck.nether.net">mailto:cisco-voip-bounces@puck.nether.net</a>] On Behalf Of James Jung
Sent: Wednesday, February 18, 2009 9:32 PM
To: <a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
Subject: [cisco-voip] Avaya - CCM v5 Integration
Hi, Gurus
I have a customer who use Avaya G3si V7 and CCM v5.1.3.
Voice GW is connected to Avaya PBX through PRI-5net. CCM is using MGCP.
(( CCM - Voice GW - Avaya - PSTN ))
The problem is when Avaya phone calls to Cisco IP phones, the calling
name is not displayed on the IP phones.
Before this, we used H.323 and at that time, the calling name was
displayed on the Cisco IP phones, but after changing to MGCP, nothing is
displayed.
I'd really appreciate if anyone can help me on this.
Below is the Q931 debug messages that shows calls from avaya phone to
cisco IP phone.
Feb 10 14:42:04: ISDN Se0/0/1:15 Q931: RX <- SETUP pd = 8 callref =
0x2E05
Sending Complete
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA18385
Preferred, Channel 5
Progress Ind i = 0x8183 - Origination address is non-ISDN
Called Party Number i = 0x80, '3940'
Plan:Unknown, Type:Unknown
Locking Shift to Codeset 6
Codeset 6 IE 0x28 i = 'Russel McAuliff'
Feb 10 14:42:04: ISDN Se0/0/1:15 Q931: TX -> CALL_PROC pd = 8 callref =
0xAE05
Channel ID i = 0xA98385
Exclusive, Channel 5
Feb 10 14:42:04: ISDN Se0/0/1:15 Q931: TX -> ALERTING pd = 8 callref =
0xAE05
Progress Ind i = 0x8088 - In-band info or appropriate now
available
Feb 10 14:42:07: ISDN Se0/0/1:15 Q931: TX -> CONNECT pd = 8 callref =
0xAE05
Display i = 'Lois Mckay'
Feb 10 14:42:07: ISDN Se0/0/1:15 Q931: RX <- CONNECT_ACK pd = 8 callref
= 0x2E05
Feb 10 14:42:19: ISDN Se0/0/1:15 Q931: RX <- DISCONNECT pd = 8 callref
= 0x2E05
Feb 10 14:44:37: ISDN Se0/0/1:15 Q931: RX <- SETUP pd = 8 callref =
0x2E92
Sending Complete
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA18388
Preferred, Channel 8
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0xA1, '3095'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '3940'
Plan:Unknown, Type:Unknown
Locking Shift to Codeset 6
Codeset 6 IE 0x28 i = 'David Franklin'
Feb 10 14:44:37: ISDN Se0/0/1:15 Q931: TX -> CALL_PROC pd = 8 callref =
0xAE92
Channel ID i = 0xA98388
Exclusive, Channel 8
Feb 10 14:44:37: ISDN Se0/0/1:15 Q931: TX -> ALERTING pd = 8 callref =
0xAE92
Progress Ind i = 0x8088 - In-band info or appropriate now
available
Feb 10 14:44:38: ISDN Se0/0/1:15 Q931: RX <- CONNECT pd = 8 callref =
0x81C1
Progress Ind i = 0x8282 - Destination address is non-ISDN
Date/Time i = 0x09020A0E2C
Date (yr-mm-dd) = 09-02-10
Time (hr:mnt:sec) = 14:44:164
Feb 10 14:44:38: ISDN Se0/0/1:15 Q931: TX -> CONNECT_ACK pd = 8 callref
= 0x01C1
Feb 10 14:44:57: ISDN Se0/0/1:15 Q931: TX -> CONNECT pd = 8 callref =
0xAE92
Feb 10 14:44:57: ISDN Se0/0/1:15 Q931: RX <- CONNECT_ACK pd = 8 callref
= 0x2E92
Thanks and regards,
James.
________________________________
Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you.
</pre>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
<br>
</body>
</html>