Sounds like you need a dial peer instead of an ephone-dn<br><br>dial-peer voice 1004 pots<br> destination-pattern 1004<br> port 0/0/0<br><br><br>Let me know how that treats you.<br><br><div class="gmail_quote">On Sun, Feb 22, 2009 at 1:58 PM, Ian Tait <span dir="ltr"><<a href="mailto:ian.t@thoughtbubble.net">ian.t@thoughtbubble.net</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Lads and lasses,<br>
<br>
I'm missing something in my setup.<br>
<br>
I've got a 3640 with 2 FXS ports, from which I can make calls, and<br>
calling a local IP phone from an analogue phone attached to one of the<br>
FXS ports, show up as the correct extension, but I can't call the<br>
analogue extension from any other phone - busy tone.<br>
<br>
IOS 12.4(21)<br>
<br>
Relevant bits of config:<br>
<br>
! FXS port...<br>
<br>
voice-port 0/0/0<br>
<br>
station-id name 0<br>
<br>
station-id number 1004<br>
<br>
<br>
! dn for analogue phone...<br>
ephone-dn 4<br>
<br>
number 1004<br>
<br>
<br>
I'm guessing I need to figure out the mac address of the port to put it<br>
in the 'ephone 4' section, which is pretty bare at the mo :-)<br>
<br>
If so, how do I do that? :-) Or what else may I have missed?<br>
<br>
Thanks,<br>
<br>
Ian<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div><br>