<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.6000.16788" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=811452000-23022009>Hi,</SPAN></FONT></DIV>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=811452000-23022009></SPAN></FONT> </DIV>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=811452000-23022009>A quick test of that still gives me a busy
tone.</SPAN></FONT></DIV>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=811452000-23022009></SPAN></FONT> </DIV>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=811452000-23022009>I'll play around with the idea though -
thanks!</SPAN></FONT></DIV>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=811452000-23022009></SPAN></FONT> </DIV>
<DIV dir=ltr align=left><FONT face=Arial color=#0000ff size=2><SPAN
class=811452000-23022009>Ian</SPAN></FONT></DIV><BR>
<BLOCKQUOTE
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px solid; MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> Jason Burns
[mailto:burns.jason@gmail.com] <BR><B>Sent:</B> 22 February 2009
20:12<BR><B>To:</B> Ian Tait<BR><B>Cc:</B>
cisco-voip@puck.nether.net<BR><B>Subject:</B> Re: [cisco-voip] FXS port as
extension<BR></FONT><BR></DIV>
<DIV></DIV>Sounds like you need a dial peer instead of an
ephone-dn<BR><BR>dial-peer voice 1004 pots<BR> destination-pattern
1004<BR> port 0/0/0<BR><BR><BR>Let me know how that treats you.<BR><BR>
<DIV class=gmail_quote>On Sun, Feb 22, 2009 at 1:58 PM, Ian Tait <SPAN
dir=ltr><<A
href="mailto:ian.t@thoughtbubble.net">ian.t@thoughtbubble.net</A>></SPAN>
wrote:<BR>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">Lads
and lasses,<BR><BR>I'm missing something in my setup.<BR><BR>I've got a 3640
with 2 FXS ports, from which I can make calls, and<BR>calling a local IP
phone from an analogue phone attached to one of the<BR>FXS ports, show up as
the correct extension, but I can't call the<BR>analogue extension from any
other phone - busy tone.<BR><BR>IOS 12.4(21)<BR><BR>Relevant bits of
config:<BR><BR>! FXS port...<BR><BR>voice-port 0/0/0<BR><BR> station-id
name 0<BR><BR> station-id number 1004<BR><BR><BR>! dn for analogue
phone...<BR>ephone-dn 4<BR><BR> number 1004<BR><BR><BR>I'm
guessing I need to figure out the mac address of the port to put it<BR>in
the 'ephone 4' section, which is pretty bare at the mo :-)<BR><BR>If so, how
do I do that? :-) Or what else may I have
missed?<BR><BR>Thanks,<BR><BR>Ian<BR>_______________________________________________<BR>cisco-voip
mailing list<BR><A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target=_blank>https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR></BLOCKQUOTE></DIV><BR></BLOCKQUOTE></BODY></HTML>