Hi guys,<br><br>I'm having issues with FXO ports a router running c2800nm-adventerprisek9-mz.124-4.XC6.bin<br><br>I have configure the 2 port FXO in a truck and with connection plar.<br><br>External calls ring as expected (they hunt through a group of ephones-dn using overlays and call-forwards for busy and noan to another overplay ephone-dn etc and end up a voice mail).<br>
<br>The issue I'm having is that when the caller hand up on the first call the FXO port does not detect the disconnect and conitunes to ring, then if a second call comes in while the first is still 'hunting', the caller hears the phone ring on the hand set, but the phones do not ring - the phone rings but doesnt go anywhere.<br>
<br><br>Result while the phone is 'hunting':<br>PORT CODEC VAD VTSP STATE VPM STATE<br>============== ========= === ==================== ======================<br>0/2/0 - - - FXOLS_ONHOOK<br>
0/2/1 None - S_ALERTING FXOLS_PROCEEDING<br><br><br>Result when the phone gets to voice mail:<br>PORT CODEC VAD VTSP STATE VPM STATE<br>============== ========= === ==================== ======================<br>
0/2/0 - - - FXOLS_ONHOOK<br>0/2/1 g711ulaw n S_CONNECT FXOLS_CONNECT<br><br><br>Voice port configuration:<br>voice-port 0/2/0<br> trunk-group fxos<br> supervisory disconnect dualtone mid-call<br>
no battery-reversal<br> compand-type a-law<br> cptone AU<br> timeouts call-disconnect 5<br> timeouts wait-release 5<br> connection plar 500<br>!<br>voice-port 0/2/1<br> trunk-group fxos<br> supervisory disconnect dualtone mid-call<br>
no battery-reversal<br> compand-type a-law<br> cptone AU<br> timeouts call-disconnect 5<br> timeouts wait-release 5<br> connection plar 501<br><br>Can someone please help.<br><br>Thanks.<br>