<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<meta name=Generator content="Microsoft Word 12 (filtered medium)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.Section1
{page:Section1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=EN-US link=blue vlink=purple>
<div class=Section1>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Phil<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'> Try making a specific dial-peer just for that
extension. The n add the fax pass thought commands under that dial-peer.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>
cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] <b>On
Behalf Of </b>Phillip VOSS<br>
<b>Sent:</b> Tuesday, February 24, 2009 9:09 PM<br>
<b>To:</b> cisco-voip@puck.nether.net<br>
<b>Subject:</b> [cisco-voip] FXS fax configuration, dial-peer problem<o:p></o:p></span></p>
</div>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<div>
<div>
<p class=MsoNormal>I have a 2851 from a closed site I'm using as a router on a
stick for FXO and FXS ports.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>The FXO configured for overhead paging and works.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>The FXS can call a dial-peer on another port of the FXS.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>Call Manager 4.2 routes calls to the FXO.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>I'm trying to route calls from the gateway router to this
router on a stick to complete the fax call.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>The FXS module was just purchased.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>I have pasted what I think is the applicable config and
debug infomation below.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>The extension 5486 is my test extension for the fax
configuration.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>To me, it looks like once a call reaches the incoming
dial-peer 3, it just stays there and never finds a better choice.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>I think there must be something simple wrong, but what?<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>Thank anyone for any help they can provide.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>Phil<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>!<br>
voice class codec 1<br>
codec preference 1 g711ulaw<br>
!<br>
!<br>
translation-rule 1<br>
Rule 1 ^5555 0<br>
!<br>
!<br>
voice class h323 1<br>
h225 timeout tcp establish 3<br>
h225 timeout setup 2<br>
!<br>
!<br>
interface BVI1<br>
description To FS-Core-SW01<br>
ip address 10.18.150.5 255.255.255.0<br>
h323-gateway voip interface<br>
h323-gateway voip bind srcaddr 10.18.150.5<br>
!<br>
!<br>
voice-port 0/0/0<br>
timing hookflash-out 50<br>
!<br>
voice-port 0/0/1<br>
!<br>
voice-port 0/3/0:23<br>
bearer-cap Speech<br>
!<br>
voice-port 0/1/1<br>
description FXS-port for fax test<br>
station-id name FS test<br>
station-id number xxxxxxx5486<br>
caller-id enable type 1<br>
!<br>
!<br>
dial-peer voice 1 voip<br>
description from call mananger<br>
voice-class codec 1<br>
incoming called-number .<br>
dtmf-relay h245-alphanumeric<br>
no vad<br>
!<br>
dial-peer voice 2 voip<br>
description all dialed to gateway router<br>
destination-pattern 9T<br>
modem passthrough nse codec g711ulaw<br>
voice-class codec 1<br>
session target ipv4:172.18.150.5<br>
incoming called-number .<br>
no vad<br>
!<br>
dial-peer voice 10 pots<br>
description for overhead page<br>
destination-pattern 555.<br>
port 0/0/0<br>
!<br>
dial-peer voice 20 pots<br>
description for fax on port 0/1/0<br>
destination-pattern 4730<br>
port 0/1/0<br>
forward-digits 0<br>
!<br>
!<br>
dial-peer voice 21 pots<br>
description for test on port 0/1/1<br>
destination-pattern 5486<br>
port 0/1/1<br>
forward-digits 0<br>
!<br>
!<br>
dial-peer voice 3 voip<br>
modem passthrough nse codec g711ulaw<br>
voice-class codec 1<br>
incoming called-number 54..<br>
no vad<br>
!<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>FS-Voice-RT01#debug voip ccapi inout<br>
voip ccapi inout debugging is on<br>
FS-Voice-RT01#<br>
*Feb 24 15:06:02.969: //-1/1AC6D4BC8161/CCAPI/cc_api_create_cc_entry_common:<br>
Interface=0x46E8850C, Call Id=22,<br>
Call Info=9546957053(TON=National, NPI=ISDN, Screening=Network,
Presentation=Allowed),<br>
Called Number=5486(TON=Unknown, NPI=Unknown),<br>
FinalDestinationFlag=TRUE, Incoming Dial-peer=3<br>
*Feb 24 15:06:02.969: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>*Feb 24 15:06:02.969: :cc_get_feature_vsa malloc success<br>
*Feb 24 15:06:02.969: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>*Feb 24 15:06:02.969: cc_get_feature_vsa count is 1<br>
*Feb 24 15:06:02.969: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>*Feb 24 15:06:02.969: :FEATURE_VSA attributes are:
feature_name:0,fearture_time:1181895768,feature_id:22<br>
*Feb 24 15:06:02.985: //22/1AC6D4BC8161/CCAPI/cc_api_delete_cc_entry:<br>
Interface=0x46E8850C, Disposition=0x0, Tag=0x0, Call Id=22<br>
*Feb 24 15:06:02.985: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>*Feb 24 15:06:02.985: :cc_free_feature_vsa freeing 46724C50<br>
*Feb 24 15:06:02.985: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>*Feb 24 15:06:02.985: vsacount in free is 0<br>
FS-Voice-RT01#<br>
FS-Voice-RT01#no debug voip ccapi inout<br>
voip ccapi inout debugging is off<br>
FS-Voice-RT01#<br>
FS-Voice-RT01#Debug voice dialpeer inout<br>
voip dialpeer inout debugging is on<br>
FS-Voice-RT01#<br>
*Feb 24 15:10:08.494: //-1/AD1EAEAC8162/DPM/dpAssociateIncomingPeerCore:<br>
Calling Number=xxxxxxx7053, Called Number=5486,
Voice-Interface=0x0,<br>
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search
Type=PEER_TYPE_VOICE,<br>
Peer Info Type=DIALPEER_INFO_SPEECH<br>
*Feb 24 15:10:08.494: //-1/AD1EAEAC8162/DPM/dpAssociateIncomingPeerCore:<br>
Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming
Dial-peer=3<br>
*Feb 24 15:10:08.494: //-1/AD1EAEAC8162/DPM/dpAssociateIncomingPeerCore:<br>
Calling Number=9546957053, Called Number=5486,
Voice-Interface=0x0,<br>
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search
Type=PEER_TYPE_VOICE,<br>
Peer Info Type=DIALPEER_INFO_SPEECH<br>
*Feb 24 15:10:08.494: //-1/AD1EAEAC8162/DPM/dpAssociateIncomingPeerCore:<br>
Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming
Dial-peer=3<br>
FS-Voice-RT01#<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><br>
<o:p></o:p></p>
</div>
</div>
</div>
</body>
</html>