<HTML>
<HEAD>
<TITLE>Intercluster Dialing Issue</TITLE>
</HEAD>
<BODY>
<FONT SIZE="4"><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:14.0px'><B>Hello, everyone. My first post to this forum so will try to provide enough info to fully explain the issue.<BR>
<BR>
We have two (2) Call Manager clusters connected via an MPLS WAN. When I try to directly dial a five (5) digit extension on cluster B from cluster A, the first time I dial the call can take up to forty-five (45) seconds to connect. If I dial an extension, immediately hang up and then immediately dial that same extension again, the call goes right through. My first thought was that I had a conflicting dial pattern that was waiting for more digits before timing out and completing the call but that does not appear to be the case. Just wondering if anyone else has run into a similar issue and what they may have found the issue to be. This worked without issue for quite some time so its likely some change that we made when adding another location has caused the issue but thus far I have not been able to track it down.<BR>
<BR>
Thank You...<BR>
</B></SPAN></FONT></FONT><FONT FACE="Verdana, Helvetica, Arial"><FONT SIZE="2"><SPAN STYLE='font-size:10.0px'>-- <BR>
Jim Reed<BR>
Technology Wrangler<BR>
Swift Communications, Inc.<BR>
970-683-5646 (Direct)<BR>
775-772-7666 (Cell)<BR>
<BR>
</SPAN></FONT></FONT>
</BODY>
</HTML>