I've got some SCCP controlled FXS ports running on a new CME 7.1 install and I'm having some trouble with those ports getting hung up. Using "show stcapp device summary" I show the port in the status "REM_ONHOOK_PEN" and I believe they have a fast busy when they pick up the analog line. It's sporadic over a number of FXS ports on an EVM module. Anyone seen this, or have any thoughts? Bouncing the port clears the issue for hours/days. <br>
<br>Slot 2:<br> Voice VM-8FXS/DID Port adapter<br><br> EM Slot 0:<br> EM3-HDA-8FXS/DID Voice Expansion Module (8 port)<br><br> EM Slot 1:<br> EM3-HDA-8FXS/DID Voice Expansion Module (8 port)<br><br><br>
Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(22)YB, RELEASE SOFTWARE (fc2)<br><br>CONFIG (Version=7.1)<br>=====================<br>Version 7.1<br>Cisco Unified Communications Manager Express<br>
<br>ISR2821-VGW01#show stcapp dev sum<br>Total Devices: 24<br>Total Calls in Progress: 0<br>Total Call Legs in Use: 0<br><br>Port Device Device Call Dev Directory Dev<br>Identifier Name State State Type Number Cntl<br>
---------- --------------- -------- ------------- ------- ----------- ----<br>2/0/0 AN2414336600400 IS IDLE ALG 8669 CME<br>2/0/1 AN2414336600401 IS IDLE ALG 8641 CME<br>
2/0/2 AN2414336600402 IS IDLE ALG 8668 CME<br>2/0/3 AN2414336600403 IS IDLE ALG 8652 CME<br>2/0/4 AN2414336600404 IS IDLE ALG 8607 CME<br>
2/0/5 AN2414336600405 IS IDLE ALG 8693 CME<br>2/0/6 AN2414336600406 IS IDLE ALG 8612 CME<br>2/0/7 AN2414336600407 IS IDLE ALG 8664 CME<br>
2/0/8 AN2414336600408 IS IDLE ALG 8606 CME<br>2/0/9 AN2414336600409 IS IDLE ALG 8710 CME<br>2/0/10 AN241433660040A IS IDLE ALG 8640 CME<br>
2/0/11 AN241433660040B IS IDLE ALG 8752 CME<br>2/0/12 AN241433660040C IS IDLE ALG 8643 CME<br>2/0/13 AN241433660040D IS REM_ONHOOK_PEN ALG 8600 CME<br>
<br><br><br>