As a test, I built another publisher on my LAN, created the ICT to the other publisher on the LAN, built the Route Pattern, everything is setup, reset the trunks and calls work.. from publisher 1(5XXX) to publisher 2 (6XXX). However calls from publisher 2 to publisher 1 ring busy.<div>
<br></div><div>Any ideas?<br><br><div class="gmail_quote">On Thu, Apr 2, 2009 at 8:30 PM, Tanner Ezell <span dir="ltr"><<a href="mailto:tanner.ezell@gmail.com">tanner.ezell@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
<div lang="EN-US" link="blue" vlink="purple">It is registered on both sides, I reset anyway and same result. Only thing I can think of is one is behind an ASA, could that be interfering? It is setup to inspect h323 and h225<p>
Sent via BlackBerry from T-Mobile</p><p></p><hr size="2" width="100%" align="center"><b>From</b>: "Ryan Ratliff" <br><b>Date</b>: Thu, 2 Apr 2009 23:23:15 -0400<br><b>To</b>: 'Tanner Ezell'<<a href="mailto:tanner.ezell@gmail.com" target="_blank">tanner.ezell@gmail.com</a>>; 'VOIP Group'<<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a>><br>
<b>Subject</b>: RE: [cisco-voip] Intercluster Trunk<br><p></p><div><div></div><div class="h5"> <div> <p><span style="font-size:11.0pt;color:#1F497D">Check to make sure your route list is registered. If not try resetting it or pointing your route pattern directly at the trunk rather than using a RG/RL.</span></p>
<p><span style="font-size:11.0pt;color:#1F497D"> </span></p> <p><span style="font-size:11.0pt;color:#1F497D">-Ryan</span></p> <p><span style="font-size:11.0pt;color:#1F497D"> </span></p> <div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in">
<p><b><span style="font-size:10.0pt">From:</span></b><span style="font-size:10.0pt"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Tanner Ezell<br>
<b>Sent:</b> Thursday, April 02, 2009 11:16 PM<br><b>To:</b> VOIP Group<br><b>Subject:</b> [cisco-voip] Intercluster Trunk</span></p> </div> <p> </p> <p>Hey all, I'm using CUCM v7 in my lab and I'm having a hard time getting an ICT (non-gk) working between CUCM publishers. Assuming a virgin install, I created a trunk, set the ip of the other publisher. I created a route group containing the trunk, I created a route list containing the route group, and a route pattern pointing to the route list. When i attempt to dial the other side, i get fast busy and I see no call signaling from my call manager to the other publisher. Can anyone provide some insight on where to look? I'm out of ideas.</p>
<div> <p> </p> </div> <div> <p>Thanks all.</p> </div> </div> </div></div></div> </blockquote></div><br></div>