<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>I third that opinion. I use SCCP and it was very easy to setup. I think SCCP debugs are also more helpful (I could be wrong there).<br><br>That being said, we are using modem/fax passthrough and have downgraded our FAXes to 14.4/ECC off.<br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>"Bad grammar makes me [sic]" - Tshirt<br><br><br>----- Original Message -----<br>From: "Jonathan Charles" <jonvoip@gmail.com><br>To: "Paul" <asobihoudai@yahoo.com><br>Cc: "Scott Kee" <SKee@cmsstl.com>, cisco-voip@puck.nether.net<br>Sent: Monday, April 27, 2009 1:16:01 PM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] VG224 issue<br><br>Oh, wow, it is MGCP... I didn't even see that...<br><br>Yeah, ditto, go with SCCP.<br><br>J<br><br>On Mon, Apr 27, 2009 at 9:24 AM, Paul <asobihoudai@yahoo.com> wrote:<br>><br>> Personally, I'd ditch the MGCP and use Skinny for the VG224. I've had a lot more luck and flexibility using Skinny. Make sure you update the IOS on the VG.<br>><br>> Paul<br>><br>><br>> ----- Original Message ----<br>> From: Scott Kee <SKee@cmsstl.com><br>> To: "cisco-voip@puck.nether.net" <cisco-voip@puck.nether.net><br>> Sent: Monday, April 27, 2009 8:58:18 AM<br>> Subject: [cisco-voip] VG224 issue<br>><br>><br>> I have VG224 with CM 6.1 and using MGCP. I have about 18 fax machines plugged into this Voice Gateway.<br>> Sometime early March people started complaining that they weren't receiving faxes from outside.<br>> They were hearing fast busy signal when outside people send faxes to the fax machines that were plugged into the VG 224.<br>> I reloaded VG 224 and power recycled fax machines but it did not make any difference.<br>> I called Cisco TAC and worked on the issue for about 20 hours but did not find any issues.<br>> We RMA the router but it did not make any difference. We ended up removing the VG224 gateway from CM and recreated it. That seemed fixed the issues then.<br>><br>> This afternoon, I am seeing exact same issues with VG 224. It was working fine till now.<br>> I did not make any configuration changes on the VG224...<br>> I am going to call Cisco tomorrow morning but I don't know Cisco is going to do this time?<br>> Is this CM issue or VG?<br>><br>> Does anyone experience this issue?<br>><br>> Any help would really appreciated.<br>><br>> Thanks,<br>><br>> _______________________________________________<br>> cisco-voip mailing list<br>> cisco-voip@puck.nether.net<br>> https://puck.nether.net/mailman/listinfo/cisco-voip<br>> _______________________________________________<br>> cisco-voip mailing list<br>> cisco-voip@puck.nether.net<br>> https://puck.nether.net/mailman/listinfo/cisco-voip<br>><br>><br>><br>><br>> _______________________________________________<br>> cisco-voip mailing list<br>> cisco-voip@puck.nether.net<br>> https://puck.nether.net/mailman/listinfo/cisco-voip<br>><br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div></body></html>