<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Hmm, I'm going to need a little more convincing on this one.<br>
<br>
phone1----------homerouter-----------ASA--(typical enterprise with
cm)--phone2<br>
10.10.11.2 10.10.11.1 10.10.10.76 <br>
*homerouter doubles as a firewall as is common<br>
<br>
In the ORCAck that leaves phone1 offers to receive audio on 10.10.11.2
port 33333.<br>
homerouter is blissfully unaware of SCCP so passes the IP datagram
along after rewriting IP headers for the 10.10.10.76 network<br>
this gets through ASA with any translation it does, then on to CM, then
on to phone2.<br>
<br>
phone2 begins to transmit audio. Audio goes to the IP:Port fixed up by
ASA. ASA rewrites IP and UDP and passes along back toward home router.<br>
<br>
Now comes the challenge. homerouter never knew it should listen on
port 33333. It would have to be SCCP aware to do that. It would have
to be SCCP aware to rewrite that to any other port number.<br>
<br>
So the audio via RTP/UDP/IP is back to the "outside" interface of
homerouter, but how does it get through to phone1?<br>
<br>
/Wes<br>
<br>
<br>
On Thursday, May 07, 2009 10:47:36 AM, Jason Burns
<a class="moz-txt-link-rfc2396E" href="mailto:burns.jason@gmail.com"><burns.jason@gmail.com></a> wrote:<br>
<blockquote
cite="mid:78d9bfc20905070747l58baf062l7c5aef8545b0361b@mail.gmail.com"
type="cite">Ryan,<br>
<br>
Even though the IP Phone would be embedding it's own private IP address
inside of SCCP ORCAck messages, the ASA Phone Proxy feature would know
the message was really sourced from the public IP. The Phone Proxy
would handle that, so that the Linksys doesn't have to worry about SCCP
fixup.<br>
<br>
One important caveat is that with PAT, not al homel routers support a
TFTP Client connection like the phone tries to do to the ASA Phone
Proxy.<br>
<br>
TFTP is destined to UDP port 69 for the initial Read Request, then a
new connection on an ephemeral port is negotiated, and not all home
routers know to look for this to open the new UDP Port.<br>
<br>
If you run into TFTP problems you will have to configure the IP Phone's
IP to be in the DMZ so that all ports get forwarded to the IP Phone.<br>
<br>
So, the short answer is that just about any home router should work
with the ASA Phone Proxy. Provided you're on the very latest ASA code
(as PhoneProxy is still a very new product).<br>
<br>
<div class="gmail_quote">On Thu, May 7, 2009 at 10:29 AM, Ryan
Ratliff <span dir="ltr"><<a moz-do-not-send="true"
href="mailto:rratliff@cisco.com">rratliff@cisco.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Your
Linksys router is going to be doing NAT/PAT and I'm pretty confident
they don't support SCCP fixup. You will need the phone to either be in
the DMZ or have a vpn tunnel behind the Linksys.<br>
<br>
-Ryan
<div>
<div class="h5"><br>
<br>
On May 7, 2009, at 10:12 AM, Miller, Steve wrote:<br>
<br>
Yes. I am just trying to make sure that there is nothing other than
generic router (Linksys or whatever someone would normally have in
their home) and the phone which are necessary to work with the the
ASA55XX back at the network site. We have been using VPN3002 boxes
which are expensive and sometimes problematic to set up/program. Thank
you for your feedback!<br>
<br>
Steve Miller<br>
Telecom Engineer<br>
Dickstein Shapiro LLP<br>
1825 Eye Street NW | Washington, DC 20006<br>
Tel (202) 420-3370| Fax (202) 330-5607<br>
<a moz-do-not-send="true" href="mailto:MillerS@dicksteinshapiro.com"
target="_blank">MillerS@dicksteinshapiro.com</a><br>
<br>
<br>
<br>
From: Matthew Loraditch [mailto:<a moz-do-not-send="true"
href="mailto:MLoraditch@heliontechnologies.com" target="_blank">MLoraditch@heliontechnologies.com</a>]<br>
Sent: Thursday, May 07, 2009 10:08 AM<br>
To: Miller, Steve; Cisco VOIP<br>
Subject: RE: Deploying 7961 Phones Remotely with ASA5500?<br>
<br>
What do you mean by necessary? If you can get your Linksys to setup a
vpn tunnel then yes<br>
<br>
<br>
<br>
<br>
<br>
Matthew Loraditch<br>
1965 Greenspring Drive<br>
<br>
Timonium, MD 21093<br>
<a moz-do-not-send="true"
href="mailto:support@heliontechnologies.com" target="_blank">support@heliontechnologies.com</a><br>
(p) (410) 252-8830<br>
(F) (443) 541-1593<br>
<br>
Visit us at <a moz-do-not-send="true"
href="http://www.heliontechnologies.com" target="_blank">www.heliontechnologies.com</a><br>
Support Issue? Email <a moz-do-not-send="true"
href="mailto:support@heliontechnologies.com" target="_blank">support@heliontechnologies.com</a>
for fast assistance!<br>
<br>
<br>
<br>
From: Miller, Steve [mailto:<a moz-do-not-send="true"
href="mailto:MillerS@DicksteinShapiro.COM" target="_blank">MillerS@DicksteinShapiro.COM</a>]<br>
Sent: Thursday, May 07, 2009 10:05 AM<br>
To: Matthew Loraditch<br>
Subject: Re: Deploying 7961 Phones Remotely with ASA5500?<br>
<br>
<br>
<br>
Thanks. Only the phone is necessary, correct?<br>
<br>
<br>
Steve Miller<br>
Telecom Engineer<br>
Dickstein Shapiro LLP<br>
1825 Eye Street NW<br>
Washington, DC 20006<br>
Tel (202) 420-3370<br>
Fax (202)-330-5607<br>
<a moz-do-not-send="true" href="mailto:millers@dicksteinshapiro.com"
target="_blank">millers@dicksteinshapiro.com</a><br>
<br>
From: Matthew Loraditch<br>
To: Miller, Steve; Cisco VOIP<br>
Sent: Thu May 07 09:45:41 2009<br>
Subject: RE: Deploying 7961 Phones Remotely with ASA5500?<br>
<br>
Only the hardware needed to establish connectivity back to the cluster
(VPN or direct via a t-1 or other circuit), and provide power for the
phone.<br>
<br>
You could use an ASA5505 and that does poe and the vpn tunnel all in one<br>
<br>
<br>
<br>
<br>
<br>
Matthew Loraditch<br>
1965 Greenspring Drive<br>
<br>
Timonium, MD 21093<br>
<a moz-do-not-send="true"
href="mailto:support@heliontechnologies.com" target="_blank">support@heliontechnologies.com</a><br>
(p) (410) 252-8830<br>
(F) (443) 541-1593<br>
<br>
Visit us at <a moz-do-not-send="true"
href="http://www.heliontechnologies.com" target="_blank">www.heliontechnologies.com</a><br>
Support Issue? Email <a moz-do-not-send="true"
href="mailto:support@heliontechnologies.com" target="_blank">support@heliontechnologies.com</a>
for fast assistance!<br>
<br>
<br>
<br>
From: <a moz-do-not-send="true"
href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>
[mailto:<a moz-do-not-send="true" href="mailto:cisco-voip-"
target="_blank">cisco-voip-</a><a moz-do-not-send="true"
href="mailto:bounces@puck.nether.net" target="_blank">bounces@puck.nether.net</a>]
On Behalf Of Miller, Steve<br>
Sent: Thursday, May 07, 2009 9:34 AM<br>
To: Cisco VOIP<br>
Subject: [cisco-voip] Deploying 7961 Phones Remotely with ASA5500?<br>
<br>
<br>
<br>
Simple question:<br>
<br>
<br>
<br>
What hardware is required (if any) at the remote location to allow a
Cisco phone to work? My understanding was that hardware was
unnecessary....that the phone could just hang off a regular Linksys
router at a person's home. Please advise. Thank you!<br>
<br>
<br>
<br>
Steve Miller<br>
Telecom Engineer<br>
Dickstein Shapiro LLP<br>
1825 Eye Street NW | Washington, DC 20006<br>
Tel (202) 420-3370| Fax (202) 330-5607<br>
<a moz-do-not-send="true" href="mailto:MillerS@dicksteinshapiro.com"
target="_blank">MillerS@dicksteinshapiro.com</a><br>
<br>
<br>
<br>
</div>
</div>
--------------------------------------------------------This e-mail
message and any attached files are confidential and are intended solely
for the use of the addressee(s)named above. This communication may
contain material protected by attorney-client, work product, or other
privileges. If you are not the intended recipient or person responsible
for delivering this confidentialcommunication to the intended
recipient, you have received this communication in error, and any
review, use, dissemination, forwarding, printing, copying, or other
distribution of this e-mail message and any attached files is strictly
prohibited. Dickstein Shapiro reserves the right to monitor any
communication that is created, received, or sent on its network. If
you have received this confidential communication in error, please
notify the sender immediately by reply e-mail message and permanently
delete the original message. To reply to our email administrator
directly, send an email to <a moz-do-not-send="true"
href="mailto:postmaster@dicksteinshapiro.com" target="_blank">postmaster@dicksteinshapiro.com</a>
Dickstein Shapiro LLPhttp://<a moz-do-not-send="true"
href="http://www.DicksteinShapiro.com" target="_blank">www.DicksteinShapiro.com</a>
==============================================================================--------------------------------------------------------This
e-mail message and any attached files are confidential and are intended
solely for the use of the addressee(s)named above. This communication
may contain material protected by attorney-client, work product, or
other privileges. If you are not the intended recipient or person
responsible for delivering this confidentialcommunication to the
intended recipient, you have received this communication in error, and
any review, use, dissemination, forwarding, printing, copying, or other
distribution of this e-mail message and any attached files is strictly
prohibited. Dickstein Shapiro reserves the right to monitor any
communication that is created, received, or sent on its network. If
you have received this confidential communication in error, please
notify the sender immediately by reply e-mail message and permanently
delete the original message. To reply to our email administrator
directly, send an email to <a moz-do-not-send="true"
href="mailto:postmaster@dicksteinshapiro.com" target="_blank">postmaster@dicksteinshapiro.com</a>
Dickstein Shapiro LLPhttp://<a moz-do-not-send="true"
href="http://www.DicksteinShapiro.com" target="_blank">www.DicksteinShapiro.com</a>
==============================================================================
<div class="im"><br>
<br>
-------------------------------------------------------- This e-mail
message and any attached files are confidential and are intended solely
for the use of the addressee(s) named above. This communication may
contain material protected by attorney-client, work product, or other
privileges. If you are not the intended recipient or person responsible
for delivering this confidential communication to the intended
recipient, you have received this communication in error, and any
review, use, dissemination, forwarding, printing, copying, or other
distribution of this e-mail message and any attached files is strictly
prohibited. Dickstein Shapiro reserves the right to monitor any
communication that is created, received, or sent on its network. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message. To reply to our email administrator directly,
send an email to <a moz-do-not-send="true"
href="mailto:postmaster@dicksteinshapiro.com" target="_blank">postmaster@dicksteinshapiro.com</a>
Dickstein Shapiro LLP <a class="moz-txt-link-freetext" href="http://">http://</a><a moz-do-not-send="true"
href="http://www.DicksteinShapiro.com" target="_blank">www.DicksteinShapiro.com</a>
==============================================================================<br>
<br>
</div>
_______________________________________________<br>
cisco-voip mailing list<br>
<a moz-do-not-send="true" href="mailto:cisco-voip@puck.nether.net"
target="_blank">cisco-voip@puck.nether.net</a><br>
<a moz-do-not-send="true"
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a moz-do-not-send="true" href="mailto:cisco-voip@puck.nether.net"
target="_blank">cisco-voip@puck.nether.net</a><br>
<a moz-do-not-send="true"
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote>
</div>
<br>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
<br>
</body>
</html>