And since you are in negative license territory, you won't be able to add the phone back once you delete it. First get your Device licenses straightened out, then you can delete and readd these devices with BAT.<br><br>
<div class="gmail_quote">On Thu, May 21, 2009 at 9:24 AM, Joe Halenkamp - JHH <span dir="ltr"><<a href="mailto:JHH@djj.com">JHH@djj.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div bgcolor="#ffffff" text="#000066">
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">No,</font></span></div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2"></font></span> </div>
<div dir="ltr" align="left"><span><font face="Arial" color="#0000ff" size="2">You can delete a device from the CCM system, which frees
up 4-license, but once added back, the new device will utilize that
license. The phones take up 4-licenses per device in CCM
6.1.</font></span></div><br>
<div dir="ltr" lang="en-us" align="left">
<hr>
<font face="Tahoma" size="2"><div class="im"><b>From:</b> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>
[mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Anthony
Kouloglou<br></div><b>Sent:</b> Thursday, May 21, 2009 1:56 AM<br><b>To:</b> Jason
Burns<div><div></div><div class="h5"><br><b>Cc:</b> ci >> "<a href="mailto:cisco-voip@puck-nether.net" target="_blank">cisco-voip@puck-nether.net</a>"<br><b>Subject:</b>
Re: [cisco-voip] Update Specific Line Fields in CUCM 6.1(2) using
BAT<br></div></div></font><br></div><div><div></div><div class="h5">
<div></div><font size="-1"><font face="Trebuchet MS">Hi Jason,<br>i don't think
that i have licensing problems; at least not yet!<br>I have purchased a new 7816
HW. I bought the node and software licenses. I then installed DMA at my old HW
(7815) running CCM 4.1 and got the file that i used to install the 6.1.<br>It is
a normal procedure that leads you to have negative licenses.<br>I know that
cannot add any more phone from now unless i send to cisco the appropriate info
of when and how i bought the devices at first place.<br>Then, cisco will send me
the new device licenses that will bring my system to zero device
licenses.<br></font></font>So, my question is: is there or not going to be a
problem if i delete now a device and then readd it?<br><br><br>Jason Burns
wrote:
<blockquote type="cite">Fix your licensing problems first. If the License Unit Report web
page is reporting negative license units you won't be able to add any phones.
The problem is most likely that the licenses are not loaded, that the licenses
loaded are incorrect, or that there is a bug in CallManager (in order of the
probability I typically see)<br><br>If you go to the License File Upload page
you should see at least three licenses<br><br>Phone Unit - The DLUs for
devices<br>Node - One unit needed for each CCM server in the
cluster<br>Software Feature - needed for CCM service to start<br><br>The files
will have a long random looking name, and have XML data inside of them tell
you how many units, and of what type those units are. You can just look at
them with a naked eye to verify that you have enough node, phone unit
licenses, and a single software feature license.<br><br>
<div class="gmail_quote">On Wed, May 20, 2009 at 5:38 PM, Go0se <span dir="ltr"><<a href="mailto:me@go0se.com" target="_blank">me@go0se.com</a>></span> wrote:<br>
<blockquote style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;" class="gmail_quote">
<div vlink="purple" link="blue" bgcolor="white" lang="EN-US">
<div>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">I wouldn’t believe
you about the negative DLUs except I’ve seen it with my own eyes… although
it was on a cucumber 7 box. </span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"><soap box> I’m
shocked the Cisco licensing Nazis would allow this. </soap box>
</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">Anyway, I don’t know
what to tell you – if you delete a single phone will it let you add it
back?</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">-go0se</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"><a href="http://atc.go0se.com" target="_blank">http://atc.go0se.com</a></span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<div>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p><b><span style="color: windowtext; font-size: 10pt;">From:</span></b><span style="color: windowtext; font-size: 10pt;"> Anthony Kouloglou [mailto:<a href="mailto:akoul@dataways.gr" target="_blank">akoul@dataways.gr</a>] <br>
<b>Sent:</b> Wednesday,
May 20, 2009 3:22 PM
<div>
<div><br><b>To:</b> Go0se<br><b>Cc:</b> 'Dana Tong (AU)'; 'ci
>> "<a href="mailto:cisco-voip@puck-nether.net" target="_blank">cisco-voip@puck-nether.net</a>"'<br><b>Subject:</b>
Re: [cisco-voip] Update Specific Line Fields in CUCM 6.1(2) using
BAT</div></div></span>
</p><p></p></div></div>
<div>
<div>
<p> </p>
<p><span style="font-size: 10pt;">Hi Goose,<br>i am afraid of deleting the
devices and reentering them. Why?<br>Because all the device licenses in this
CUCM were produced by upgrading the previous 4.1 CCM.<br>In that way, i have
a -XXX device units.<br>Were the system allow me to delete these devices and
then reenter them?<br><br>Cheers<br>Anthony<br></span><br>Go0se wrote: </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">There is an UPDATE
feature but unless I’m misunderstanding your request it won’t do what you
want to do. If you want to change the external phone number mask field on
every line with an extension that begins with X to 234555XXXX or if you want
to change the forward busy internal destination to 4500 on every phone in a
certain calling search space then the UPDATE tool is perfect. But if you
want it to change the line text label to something different on each line of
1000 phones (each line text label has a different value), then the
update tool won’t work. Your description of what you are trying to achieve
is vague – I assume that you want to have a spreadsheet that has something
like:</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">EXT
NEW LINE TEXT LABEL</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">1000
Joe Smith</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">1001
Bob Jones</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">1003
Ann Johnson</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">1307
Mike Regal</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">(and so
on)</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">And then you want
BAT to go thru the above file and if it finds ext. 1000 then it should
overwrite the existing line text label with Joe Smith and then on ext. 1001
replace the existing line text label with Bob Jones, etc., etc. It won’t to
this. If this is what you want I don’t know of any other way than either AXL
or deleting and recreating the phones (or updating each line
manually).</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">If anyone else knows
of an easier or better way it I’m all ears.</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">-Go0se</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"><a href="http://atc.go0se.com" target="_blank">http://atc.go0se.com</a></span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<div>
<div style="border-style: solid none none; border-color: -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p><b><span style="color: windowtext; font-size: 10pt;">From:</span></b><span style="color: windowtext; font-size: 10pt;"> Anthony Kouloglou [<a href="mailto:akoul@dataways.gr" target="_blank">mailto:akoul@dataways.gr</a>] <br>
<b>Sent:</b>
Wednesday, May 20, 2009 12:38 PM<br><b>To:</b> Go0se<br><b>Cc:</b> 'Dana
Tong (AU)'; 'ci >> <a href="mailto:cisco-voip@puck-nether.net" target="_blank">"cisco-voip@puck-nether.net"</a>'<br><b>Subject:</b>
Re: [cisco-voip] Update Specific Line Fields in CUCM 6.1(2) using
BAT</span></p></div></div>
<p> </p>
<p><span style="font-size: 10pt;">Hi Goose,<br>you mean what Dana suggested,
is not possible? I will have to delete the phones before reentering
them?<br>There is no way to update the
phones?<br><br>Thanks<br>Anthony<br></span><br>Go0se wrote: </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">If you are using BAT
you would need to export the phone information, “massage” it back into a new
BAT file (or files) with required changes, delete the existing phones, and
then re-import the phones from the new BAT file(s). IF YOU DO THIS BE SURE
YOU HAVE AUTO REGISTRATION TURNED OFF otherwise all your phones will auto
register after you do the delete and the new import will fail. If you have a
lot of phones to update, I’ll give you a word of advice from experience… I
would suggest you perform this on a small subset of phones first before you
“shotgun blast” a large number of phones.</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">If you simply wish
to change the Caller ID on x number of phones from their individual
extensions to say the company’s main number you can do so via the UPDATE
LINES function (BULK ADMINISTRATION | PHONES |ADD/UPDATE LINES | UPDATE
LINES). You can perform a query that finds the extensions you wish to
change, then in the UPDATE LINES section check the box next to “external
phone number mask” and in the box enter the main phone number of the
company. You cannot, however, do a query that will parse a BAT file full of
something like “current caller id” and “new caller id” fields getting it to
do a glorified “search and replace”. I believe you would need to resort to
AXL for something like that.</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;">-Go0se</span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"><a href="http://atc.go0se.com" target="_blank">http://atc.go0se.com</a></span></p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<p><span style="color: rgb(31, 73, 125); font-size: 11pt;"></span> </p>
<div>
<div style="border-style: solid none none; border-color: -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p><b><span style="color: windowtext; font-size: 10pt;">From:</span></b><span style="color: windowtext; font-size: 10pt;"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">mailto:cisco-voip-bounces@puck.nether.net</a>] <b>On
Behalf Of </b>Anthony Kouloglou<br><b>Sent:</b> Wednesday, May 20, 2009 2:22
AM<br><b>To:</b> Dana Tong (AU)<br><b>Cc:</b> ci >> <a href="mailto:cisco-voip@puck-nether.net" target="_blank">"cisco-voip@puck-nether.net"</a><br><b>Subject:</b>
Re: [cisco-voip] Update Specific Line Fields in CUCM 6.1(2) using
BAT<br><b>Importance:</b> Low</span></p></div></div>
<p> </p>
<p><span style="font-size: 10pt;">Hi,<br>do i have to delete those
phones?<br>I cannot see anywhere update phones.<br>If i try to insert phones
that are already registered, i get an error message.<br>Also, i have tried
to to inserted lines with bat.xlt but i get an error message after i click
on export to BAT format "compile error, sub or function not
defined"</span></p></div></div></div></div><br>_______________________________________________<br>cisco-voip
mailing list<br><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></blockquote></div></div></div>
</blockquote></div><br>