Hi, i have question (obviously :) ) <br clear="all"><div>I have big troubles connecting a TDM PBX to a IPPBX through SBC via SIP. When I do <em>debug isdn q931 </em>I keep getting this massages:</div><div>Cause i = 0x80E018 - Mandatory information element missing </div>
<div>Cause i = 0x80E27D - Message not compatible with call state or not implemented </div><div>Cause i = 0x82E5 - Message not compatible with call state</div><div><br></div><div>Called number is ringing but when i pick-up it gives me busy dial and if i hung-up it rings again. On the SBC I can see that after picking router sends BYE signal with "Bearer capability not implemented" and instantly sending 2 more invites for call. </div>
<div>I tried with setting bearer-cap Speech and i use the command isdn incoming-voice voice.</div><div><br></div><div>Tried many combinations... Any ideas ????</div><div><br></div><div>Thanks <br></div>-- <br>Ratko<br>