you will have to have the vendor change the default setting son the Xerox to NO ECM (Error Correction Mode) and turn off Super G3 (33.6k) so It only uses 14.4k.<div><br></div><div>Scott<br><br><div class="gmail_quote">On Fri, Jun 5, 2009 at 8:49 AM, Nick Griffin <span dir="ltr"><<a href="mailto:nick.jon.griffin@gmail.com">nick.jon.griffin@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">I've got a CME/SCCP controlled ATA 186 with a Workcentre 7655 all in one connected to line 1. Workcentre vendor is stating they don't work with an ATA, faxing seems to work intermittently. Has anyone seen this or have any recommendations? All calls out location gateway are G711. <br>
<br>Thanks in advance,<br><font color="#888888"><br>Nick Griffin<br>
</font><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>