Hi all;<br>I asked the customer to do the debug voip ccapi inout, make some calls and send me the output. And he said that nothing came out. Does it need to be combined with something else, cos this sounds impossible. I'm thinking to delete all the dial peers and make only this two:<br>
<br>dial-peer voice 1 pots<br> destination-pattern 38923141100<br> progress_ind setup enable 3<br> progress_ind alert enable 8<br> port 0/3/0:15<br>!<br>dial-peer voice 20 voip<br> destination-pattern .T<br> progress_ind setup enable 3<br>
progress_ind alert enable 8<br> voice-class codec 1<br> session protocol sipv2<br> session target ipv4:<a href="http://62.220.200.50:5060">62.220.200.50:5060</a><br> dtmf-relay rtp-nte h245-alphanumeric<br><br>Dial-peer 1 is for incoming calls to the PBX, and all the others are sent to IPPBX via dial-peer 20.<br>
<br>Suggestions???<br><br>Regards<br>Ratko<br><br><br>