Ok i found something. when i looked at the partitions, i figured out that there are 33 of them. I clicked one of the listed partitions which defined as emergency calls, i selected time schedule that i created. And did the test whether i can call emergency numbers or not. But no use. It did not work out.<br>
<br>Let me describe the time schedule which i created. I am going to demonstrate it as seen in CUCM.<fieldset></fieldset>Name: test<br>Time of Day Start: typetimeofday.TIMEOFDAY_SLICE40<br>Time of Day End: typetimeofday.TIMEOFDAY_SLICE41<br>
Repeat Every Week from TypeDayOfWeek.DAYOFWEEK_MON through TypeDayOfWeek.DAYOFWEEK_SUN<br><br><div class="gmail_quote">I selected slice 40 (as i figured out 1 slice equals to 15mins.) as it indicates that time is 10:00. I selected that because it's 11:00 o'clock in here. After configuring time period , i selected this into the Time Schedule option, and named it test_emergency_calls. <br>
<br>After creating Time schedule, i got into the partition which i mentioned above, and selected the Time Schedule test_emergency_calls. <br><br>I could not find TURKEY in specific time list box so i selected the option "originating device". Could it be the problem? Not selecting the appropriate time zone??<br>
<br>In brief, i configured all the emergency calls to be able to performed between 10:00 and 10:15 but did not work out. Besides i was searching the cisco documentation and found a sentence which is a little weird.<br><br>
"<span class="content">TOD settings comes into effect when the lines are
included in a Hunt List. The settings only apply to the Hunt Pilot and
not to the lines within that Hunt List.
</span>"<br><br><br>As i know hunt lists are imaginary DN's that combines pre-defined numbers of DN's under one to form a pool. As a matter of fact, there isn't any possibility that all used DN's could be in a Hunt list.<br>
<br>I am a little bit confused now...<br><br>Thanks in advance <br><br>CEM<br><br><br>On Thu, Jun 18, 2009 at 11:49 PM, Norton, Mike <span dir="ltr"><<a href="mailto:mikenorton@pwsd76.ab.ca">mikenorton@pwsd76.ab.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div link="blue" vlink="purple" lang="EN-CA">
<div>
<p>I think you’re misunderstanding what people are
suggesting with the time-based partitions.</p>
<p> </p>
<p>You are correct that “CSS contains partitions and
partitions contains route patterns.” It is *<b>those</b>* partitions that
you would apply the time-of-day routing to. The partition (or lack thereof) that
the phones’ DNs are in has nothing to do with it.</p>
<p> </p>
<p>-- </p>
<p>Mike Norton</p>
<p>I.T. Support</p>
<p>Peace Wapiti School Division No. 76</p>
<p>Helpdesk: 780-831-3080</p>
<p>Direct: 780-831-3076</p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0cm 0cm;">
<p><b><span style="font-size: 10pt;" lang="EN-US">From:</span></b><span style="font-size: 10pt;" lang="EN-US"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>
[mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>cem caglayan<br>
<b>Sent:</b> June-18-09 2:26 PM<br>
<b>To:</b> Chris Ward (chrward)<div><div></div><div class="h5"><br>
<b>Cc:</b> cisco-voip Voip<br>
<b>Subject:</b> Re: [cisco-voip] CUCM 6.0 Calling Search Space issue...</div></div></span></p>
</div><div><div></div><div class="h5">
<p> </p>
<p style="margin-bottom: 12pt;">As i described, i could not
find any other option except changing CSS. I'm not expert on this topic but as
i figured out, CSS contains partitions and partitions contains route patterns.
So if formulized in a cluster, the issue seems like this: </p>
<div style="margin-left: 90pt;">
<p>CSS>partition>route pattern. </p>
</div>
<p style="margin-bottom: 12pt;"><br>
So all of our phones' dial rules (route patterns in other words) are described
into CSS which are selected in DN settings.<br>
<br>
I looked at Class of Control but i could not find anything.<br>
<br>
Let me explain my situation again, maybe there are some other ways to solve
this issue.<br>
<br>
When our shift ends at work (it's about 18:30), i would like to block all the
phones' outgoing calls except interior. In other words, after a specified time
of day (let's call it 19:00), only interior calls have to be made. If you read
my older posts, our phones are not in partitions, just CSS describes their
calling ability. I'm going to put some pictures of the CM when i get back to
work, maybe the issue could be understood easier.<br>
<br>
thanks in advance.<br>
CEM<br>
<br>
</p>
<div>
<p>On Thu, Jun 18, 2009 at 7:02 PM, Chris Ward (chrward) <<a href="mailto:chrward@cisco.com" target="_blank">chrward@cisco.com</a>> wrote:</p>
<p>I saw a response early in this thread that was not directly
replied to.<br>
Why won't Time of Day routing fulfill your requirements?<br>
<span style="color: rgb(136, 136, 136);"><br>
-Chris</span></p>
<div>
<div>
<p><br>
<br>
-----Original Message-----<br>
From: <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a><br>
[mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>]
On Behalf Of Ryan Ratliff<br>
(rratliff)<br>
Sent: Thursday, June 18, 2009 11:40 AM<br>
To: cem caglayan<br>
Cc: cisco-voip Voip<br>
Subject: Re: [cisco-voip] CUCM 6.0 Calling Search Space issue...<br>
<br>
If you truly want to change all phones' CSS to None and back to their<br>
original value on a scheduled basis you would have to script this via<br>
AXL. You would need to first discover all the lines and note their<br>
current CSS. Then update all of those lines to use CSS None. When<br>
it comes time to revert you change the CSS back to the value you<br>
discovered (and stored) originally.<br>
<br>
As Lelio said if you can provide more details about the policy you<br>
are trying to implement there is a very good chance it can be done in<br>
a way that doesn't require changing all of your phone configurations<br>
each night.<br>
<br>
-Ryan<br>
<br>
On Jun 18, 2009, at 8:51 AM, Lelio Fulgenzi wrote:<br>
<br>
I think you'll find yourself in a mess of trouble trying to do it by<br>
changing the calling search space. The timed based partitions is<br>
probably your best bet.<br>
<br>
Remember, the partition the phone is in has nothing to do with the<br>
partitions it can reach.<br>
<br>
Please explain your set up a bit more for us, and we'll try to help<br>
with suggestions using time based partitions. I haven't used them<br>
much, but it's fairly easy from what I recall.<br>
<br>
The one thing I always forget is when the <none> partition is<br>
searched. I can't remember if it is searched after all the other<br>
partitions only if no other match is found, or if it is searched in<br>
order and best match rules apply.<br>
<br>
For the long term sanity of your setup, I'd strongly suggest moving<br>
your DNs to a partition. It's easier to manage things like that.<br>
<br>
You'll also have to let us know what you are trying to block, access<br>
to phones or access to off-net? And what dial plan strategy are you<br>
using? allow with device and block with DN, or just allow with device?<br>
<br>
<br>
---<br>
Lelio Fulgenzi, B.A.<br>
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
"Bad grammar makes me [sic]" - Tshirt<br>
<br>
<br>
----- Original Message -----<br>
From: "Michael Back" <<a href="mailto:Michael.Back@nisd.net" target="_blank">Michael.Back@nisd.net</a>><br>
To: "Daniel" <<a href="mailto:dan.voip@danofive.id.au" target="_blank">dan.voip@danofive.id.au</a>>,
"cem caglayan"<br>
<<a href="mailto:cem.caglayan@gmail.com" target="_blank">cem.caglayan@gmail.com</a>><br>
Cc: <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
Sent: Thursday, June 18, 2009 8:27:11 AM GMT -05:00 US/Canada Eastern<br>
Subject: Re: [cisco-voip] CUCM 6.0 Calling Search Space issue...<br>
<br>
You could try extension mobility. Make sure the phone CSS is most<br>
restrictive, and put the appropriate CSS on the line like you are<br>
currently doing. You can set a timer for Extension Mobility to log out<br>
after a specified period.<br>
<br>
MB<br>
<br>
>>> cem caglayan <<a href="mailto:cem.caglayan@gmail.com" target="_blank">cem.caglayan@gmail.com</a>>
6/18/2009 5:55 AM >>><br>
First of all thanks for the tip Dan,<br>
<br>
The main problem is, we do not have any partitions which all the<br>
phones<br>
assigned to..<br>
<br>
Our dial rules are described in "Calling Search Spaces" which consist
4<br>
or<br>
more partitions. Besides, all the phones' Calling Search Spaces are<br>
setted<br>
into the directory number configuration. I've found how to change all<br>
the<br>
phones' Calling Search Spaces to the desired value under the "Bulk<br>
Administration>Phones>Add/Update Lines>Update Lines" section.<br>
<br>
But the main problem is, we have 3 PRI lines and 12 GSM lines connected<br>
to<br>
CM via PRI by 2N Stargate. And as i described, all the phones' Calling<br>
Search Spaces are not the same at all. For example my phone can call<br>
GSM and<br>
landlines, but my manager's can call international including my dial<br>
rule.<br>
My Calling Search Space is "Landlines and GSM" but my manager's<br>
"International Calls (which means everywhere can be called)".<br>
<br>
So in brief, the problem is when i set all these phones' calling<br>
search<br>
space to NONE on a scheduled job. How can i restore them to their<br>
original<br>
values??<br>
<br>
By the way i have found to backup all the phone settings under "Bulk<br>
Administration>Phones>Export Phones>All Details". But it stores
the<br>
data in<br>
a TXT file. So i can not restore from that backup.<br>
<br>
Is there any way to fullfill according to my CUCM 6.0 profile???<br>
<br>
On Thu, Jun 18, 2009 at 9:46 AM, Daniel <<a href="mailto:dan.voip@danofive.id.au" target="_blank">dan.voip@danofive.id.au</a>><br>
wrote:<br>
<br>
> Hi,<br>
><br>
> Have you looked into time periods and schedules?<br>
><br>
> Apply a time schedule to a partition to allow access only during a<br>
certain<br>
> time period.<br>
><br>
> cheers,<br>
><br>
> Dan<br>
><br>
> On Thu, Jun 18, 2009 at 4:16 PM, cem caglayan<br>
<<a href="mailto:cem.caglayan@gmail.com" target="_blank">cem.caglayan@gmail.com</a>>wrote:<br>
><br>
>> Hi all,<br>
>><br>
>> I want to set some (about 300) users' calling search space to be
set<br>
to<br>
>> "none" after shift and bring them to their original
values in the<br>
>> morning,because of company policy. Is there any way to do this<br>
automatically<br>
>> or can this action be scheduled? Because, as you know, it is
very<br>
difficult<br>
>> to set all these users' settings to desired one and bring them
back<br>
to old<br>
>> values. I looked at some features including Job scheduler and<br>
Enterprise<br>
>> settings but no use.<br>
>><br>
>><br>
>> Thanks in advance.<br>
>><br>
>> Cem<br>
>><br>
>> _______________________________________________<br>
>> cisco-voip mailing list<br>
>> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
>><br>
>><br>
><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a></p>
</div>
</div>
</div>
<p> </p>
</div></div></div>
</div>
</blockquote></div><br>