Jeff,<br><br>you can use the Cisco Dialed Number Analyzer to confirm that you don't have a Dial Plan issue and if you do, it will help you to isolate and resolve your problem<br><br><br>Cris<br><br><div class="gmail_quote">
2009/6/25 Cristobal Priego <span dir="ltr"><<a href="mailto:cristobalpriego@gmail.com">cristobalpriego@gmail.com</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Sounds like Ian is right. you can have a dial plan problem<br>do you have a centralized deployment? if you do, you need to be very careful with the delay of MGCP, because this is a Master-Slave protocol. MGCP has a dependency of callmanager, so before you can place a call, the gw needs to talk to the CUCM to know what to do. if that's the case I'd say the best option for you is to change your protocol to H.323.<br>
<br><br>Cris<br><br><div class="gmail_quote">2009/6/25 Ian MacKinnon <span dir="ltr"><<a href="mailto:Ian.Mackinnon@lumison.net" target="_blank">Ian.Mackinnon@lumison.net</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div><div></div><div class="h5">
<div link="blue" vlink="purple" lang="EN-GB">
<div>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Hi Jeff,</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">That sounds like a dial plan problem ie it is waiting for another digit, and then timing out.</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Can you dial the number before hitting dial on the phone so it is all present as opposed to lifting the handset and dialling each digit in turn?</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0cm 0cm;">
<p><b><span style="font-size: 10pt;" lang="EN-US">From:</span></b><span style="font-size: 10pt;" lang="EN-US"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>]
<b>On Behalf Of </b>Jeff Ruttman<br>
<b>Sent:</b> 25 June 2009 14:47<br>
<b>To:</b> cisco-voip<br>
<b>Subject:</b> [cisco-voip] Slow to connect calls</span></p>
</div>
</div><div><div></div><div>
<p> </p>
<div>
<p><span style="font-size: 10pt;">Greetings,</span></p>
</div>
<div>
<p> </p>
</div>
<div>
<p><span style="font-size: 10pt;">Some of our sites have DID trunk ports and POTS lines, and we have MGCP controlled GWs with FXS and FXO configured. We also have for these sites H.323 GWs--which frankly I'm
not sure why or what they do.</span></p>
</div>
<div>
<p> </p>
</div>
<div>
<p><span style="font-size: 10pt;">Anyway, at one of those sites, it takes a count of 15 or more for an outgoing call to connect. I know some delay is expected with that setup, but that's quite a bit longer
than at our comparable sites.</span></p>
</div>
<div>
<p> </p>
</div>
<div>
<p><span style="font-size: 10pt;">Is that length of delay still within expectations? Or is there something perhaps I can do to speed that up?</span></p>
</div>
<div>
<p> </p>
</div>
<div>
<p><span style="font-size: 10pt;">Thanks</span></p>
</div>
<div>
<p><span style="font-size: 10pt;">jeff</span></p>
</div>
<div>
<p> </p>
</div>
<p>CONFIDENTIALITY NOTICE: The information contained in this email including attachments is intended for the specific delivery to and use by the individual(s) to whom it is addressed, and includes information which should be considered as
private and confidential. Any review, retransmission, dissemination, or taking of any action in reliance upon this information by anyone other than the intended recipient is prohibited. If you have received this message in error, please reply to the sender
immediately and delete the original message and any copy of it from your computer system. Thank you.</p>
</div></div></div>
<br>
<hr>
<font size="1" color="Gray" face="Arial">--<br>
<br>
This email and any files transmitted with it are confidential and intended<br>
solely for the use of the individual or entity to whom they are addressed.<br>
If you have received this email in error please notify the sender. Any<br>
offers or quotation of service are subject to formal specification.<br>
Errors and omissions excepted. Please note that any views or opinions<br>
presented in this email are solely those of the author and do not<br>
necessarily represent those of Lumison.<br>
Finally, the recipient should check this email and any attachments for the<br>
presence of viruses. Lumison accept no liability for any<br>
damage caused by any virus transmitted by this email.<br>
</font>
</div>
<br></div></div>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br>
</blockquote></div><br>