In the CCMAdmin under Device > Phone you can set the web page of the phone to read only, or read/write. That would be one thing to check. The only other thing I can think of is to get the right username and pass from the 7925 admin guide.<br>
<br><div class="gmail_quote">On Tue, Jul 7, 2009 at 11:53 AM, Countryman, Edward <span dir="ltr"><<a href="mailto:Edward.Countryman@provena.org">Edward.Countryman@provena.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
I have (50) 7925 wireless phones to set up and was hoping to use the USB<br>
interface to configure wireless profiles and WLAN parameters since these<br>
are required before CCM can see the phone. However; unlike the 7921's<br>
the set up webpage appears to be locked with no obvious way of unlocking<br>
it. What am I missing??<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div><br>