<div>Thanks for the reply. This helped me figure it out. When I did a show mgcp endpoint, I found that the FXS ports are in Subunit 1 and the FXO port is in Subunit 3 in the MGCP gateway configuration. I originally had Subunit 0 for the 4FXS and Subunit 1 for the FXO. Doesn't make much sense, but I can work with it!</div>
<div><br> </div>
<div>SLPK-881#show mgcp endpoint<br><a href="mailto:aaln/S0/SU1/0@SLPK-881">aaln/S0/SU1/0@SLPK-881</a><br><a href="mailto:aaln/S0/SU1/1@SLPK-881">aaln/S0/SU1/1@SLPK-881</a><br><a href="mailto:aaln/S0/SU3/0@SLPK-881">aaln/S0/SU3/0@SLPK-881</a></div>
<div> </div>
<div> </div>
<div>Thanks,</div>
<div>Brian</div>
<div><br><br> </div>
<div class="gmail_quote">On Tue, Jul 21, 2009 at 2:08 PM, Kris Seraphine <span dir="ltr"><<a href="mailto:baryonyx5@gmail.com">baryonyx5@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">If only the FXS ports will not register, check the status of the port (show voice port sum) if the port is off-hook or shutdown it may not register until it goes idle. <br>
<br>Also, double-check that you've specified the correct card type and slot in CCMADMIN<br><br>Do you see the FXS port listed when you do a 'show mgcp endpoint'? If not, try adding a POTS dialpeer manually<br>
<br>dial-peer voice 123456 pots<br>port x/x<br>service mgcpapp<br><br>and see if that makes a difference in the registration status. <br><br>If none of this helps, check the application syslog in RTMT for the primary subscriber and look for the registration rejected entries for this port. There should be a reason code given. You can search CCO to find out what the code means; this may be helpful.
<div>
<div></div>
<div class="h5"><br><br><br>
<div class="gmail_quote">On Tue, Jul 21, 2009 at 1:25 PM, Nick Matthews <span dir="ltr"><<a href="mailto:matthnick@gmail.com" target="_blank">matthnick@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">Quick check - make sure that 'show ccm | i Name' is what you have<br>defined in CUCM for the gateway. That's about 80% of register<br>
rejected causes.<br><br><br>-nick<br><br>On Tue, Jul 21, 2009 at 10:28 AM, Brian<<a href="mailto:bms314@gmail.com" target="_blank">bms314@gmail.com</a>> wrote:<br>> Has anyone got an 881 working as an MGCP gateway yet? I have CUCM<br>
> 6.1.3.3190 and 12.4(20)T3 on my 881 SRST routers. The Gateways are<br>> registered and I can successfully register the FXO port and a IP Phone<br>> behind the router. But the FXS port is always in a Rejected state from<br>
> CUCM. I have a 2811 with a 4FXS registered to the same CUCM without a<br>> problem. MGCP is bound to the correct interface on the 881's. I've also<br>> tried resetting the Gateway from CUCM as well as rebooting the 881 several<br>
> times. Anyone run into this before?<br>><br>> Thanks,<br>> Brian<br>> _______________________________________________<br>> cisco-voip mailing list<br>> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>><br>><br>_______________________________________________<br>cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div><br><br clear="all"><br></div></div>-- <br><font color="#888888">kris seraphine<br></font></blockquote></div><br>