<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>AH! Yes....now I remember.<br><br>I was hoping to do the reverse, i.e. change a cell phone RNA target to our Unity DID and go into their office VM box. Never got that to work, I guess I need the redirecting inbound IE.<br><br>Think that would work?<br><br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>"Bad grammar makes me [sic]" - Tshirt<br><br><br>----- Original Message -----<br>From: "Ryan Ratliff" <rratliff@cisco.com><br>To: "Lelio Fulgenzi" <lelio@uoguelph.ca><br>Cc: cisco-voip@puck.nether.net, "Eric Pedersen" <eric.pedersen@sait.ca><br>Sent: Wednesday, July 22, 2009 11:56:20 AM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] External Call Forwarding<br><br>If your gateway is going to a voicemail system then RDNIS is very <br>important. Some gateways/providers don't want to see this IE so we <br>make it so you can enable or disable it.<br><br>-Ryan<br><br>On Jul 22, 2009, at 11:45 AM, Lelio Fulgenzi wrote:<br><br>What pray tell is the redirecting IE check box for then? Just wondering.<br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>"Bad grammar makes me [sic]" - Tshirt<br><br><br>----- Original Message -----<br>From: "Ryan Ratliff" <rratliff@cisco.com><br>To: "Eric Pedersen" <eric.pedersen@sait.ca><br>Cc: "Lelio Fulgenzi" <lelio@uoguelph.ca>, cisco-voip@puck.nether.net<br>Sent: Wednesday, July 22, 2009 10:34:45 AM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] External Call Forwarding<br><br>Correct. What the telco may support is seeing their DID number in<br>the RDNIS and thus allowing the non-DID calling party number to go<br>through.<br><br>While on this topic there is a new feature in 6.1(4) that will do<br>this for mobility calls as well (not related to CFA).<br>http://cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_4/cucm-<br>rel_note-614.html#wp854592<br><br>-Ryan<br><br>On Jul 22, 2009, at 10:26 AM, Eric Pedersen wrote:<br><br>Setting the GW as Ryan suggests changes the calling number in the<br>ISDN setup. It has nothing to do with the Redirecting IE.<br><br>From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-<br>bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi<br>Sent: July 22, 2009 07:16<br>To: Ryan Ratliff<br>Cc: cisco-voip@puck.nether.net<br>Subject: Re: [cisco-voip] External Call Forwarding<br><br>Does this have to be supported by the PSTN provider? We have asked<br>them to remove the filter so we can put any number on the outbound<br>call. Is this enough?<br><br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>"Bad grammar makes me [sic]" - Tshirt<br><br><br>----- Original Message -----<br>From: "Ryan Ratliff" <rratliff@cisco.com><br>To: "Daniel" <dan.voip@danofive.id.au><br>Cc: cisco-voip@puck.nether.net<br>Sent: Wednesday, July 22, 2009 9:02:40 AM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] External Call Forwarding<br><br>Look at the calling party selection setting on your outbound<br>gateway. It's probably set to something like Originator currently,<br>where you want something like First (or Last) Redirecting party.<br><br>-Ryan<br><br>On Jul 22, 2009, at 3:15 AM, Daniel wrote:<br><br>Hi All,<br><br>I have a question about call fordwarding.<br><br>Scenario is that when an ip phone is forwarded to an external number<br>and another external number calls that ip phone the call is forwarded<br>to the external number. When the forwarded call reaches our outbound<br>gateway the calling number is the external number that started the<br>call and the called number is the external number that which is<br>configured for the CFA. Our carrier does not let us use any other<br>number then that which is in the DID range so they change the calling<br>number to the pilot number of the DID range.<br><br>Say the DID range is 123456XX (100 Numbers). Extension 5602 is CFA to<br>0456785856 (external mobile). External number 4555598598 calls<br>12345602 and it forwards to 0456785856. Currently the calling number<br>that shows up on the mobile phone 0456785856 is12345600 (pilot of<br>DID). I wouldl like the number to be 12345602. Debugging on the<br>gateway shows the calling number as 4555598598 and the called number<br>as 0456785856, our carrier does not recognise the calling number as<br>part of the DID range so changes it to the pilot point.<br><br>Is there anyway to configure the calling number to be the number of<br>the phone that forwarded the call instead of the original external<br>number?<br><br>cheers,<br><br>Daniel<br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br><br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br><br><br></div></body></html>