<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>Cool. I'll have to check this out.<br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>"Bad grammar makes me [sic]" - Tshirt<br><br><br>----- Original Message -----<br>From: "Jason Fuermann" <JBF005@shsu.edu><br>To: "Lelio Fulgenzi" <lelio@uoguelph.ca>, "Ryan Ratliff" <rratliff@cisco.com><br>Cc: cisco-voip@puck.nether.net<br>Sent: Wednesday, July 22, 2009 9:40:08 AM GMT -05:00 US/Canada Eastern<br>Subject: RE: [cisco-voip] External Call Forwarding<br><br>
<style></style>
<link href="/zimbra/css/msgview.css?v=081117021119" rel="stylesheet">
<div class="Section1">
<p class="MsoNormal"><span style="font-size: 11pt; font-family: "Calibri","sans-serif"; color: rgb(31, 73, 125);">We have ATT here and they will only let us use our DID’s for
outbound calling. However, when I receive a forwarded call, it shows up as the
original caller and says call forwarding (at least on my cell phone). I do have
Redirecting number IE Delivery checked under PRI protocol type specific information.
Might want to check there first.</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; font-family: "Calibri","sans-serif"; color: rgb(31, 73, 125);"> </span></p>
<div>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p class="MsoNormal"><b><span style="font-size: 10pt; font-family: "Tahoma","sans-serif";">From:</span></b><span style="font-size: 10pt; font-family: "Tahoma","sans-serif";">
cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] <b>On
Behalf Of </b>Lelio Fulgenzi<br>
<b>Sent:</b> Wednesday, July 22, 2009 8:16 AM<br>
<b>To:</b> Ryan Ratliff<br>
<b>Cc:</b> cisco-voip@puck.nether.net<br>
<b>Subject:</b> Re: [cisco-voip] External Call Forwarding</span></p>
</div>
</div>
<p class="MsoNormal"> </p>
<div>
<p class="MsoNormal"><span style="font-size: 10pt; font-family: "Verdana","sans-serif"; color: black;">Does this have to be supported by the PSTN provider? We have asked
them to remove the filter so we can put any number on the outbound call. Is
this enough?<br>
<br>
<br>
---<br>
Lelio Fulgenzi, B.A.<br>
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>
"Bad grammar makes me [sic]" - Tshirt<br>
<br>
<br>
----- Original Message -----<br>
From: "Ryan Ratliff" <rratliff@cisco.com><br>
To: "Daniel" <dan.voip@danofive.id.au><br>
Cc: cisco-voip@puck.nether.net<br>
Sent: Wednesday, July 22, 2009 9:02:40 AM GMT -05:00 US/Canada Eastern<br>
Subject: Re: [cisco-voip] External Call Forwarding<br>
<br>
Look at the calling party selection setting on your outbound <br>
gateway. It's probably set to something like Originator currently, <br>
where you want something like First (or Last) Redirecting party.<br>
<br>
-Ryan<br>
<br>
On Jul 22, 2009, at 3:15 AM, Daniel wrote:<br>
<br>
Hi All,<br>
<br>
I have a question about call fordwarding.<br>
<br>
Scenario is that when an ip phone is forwarded to an external number <br>
and another external number calls that ip phone the call is forwarded <br>
to the external number. When the forwarded call reaches our outbound <br>
gateway the calling number is the external number that started the <br>
call and the called number is the external number that which is <br>
configured for the CFA. Our carrier does not let us use any other <br>
number then that which is in the DID range so they change the calling <br>
number to the pilot number of the DID range.<br>
<br>
Say the DID range is 123456XX (100 Numbers). Extension 5602 is CFA to <br>
0456785856 (external mobile). External number 4555598598 calls <br>
12345602 and it forwards to 0456785856. Currently the calling number <br>
that shows up on the mobile phone 0456785856 is12345600 (pilot of <br>
DID). I wouldl like the number to be 12345602. Debugging on the <br>
gateway shows the calling number as 4555598598 and the called number <br>
as 0456785856, our carrier does not recognise the calling number as <br>
part of the DID range so changes it to the pilot point.<br>
<br>
Is there anyway to configure the calling number to be the number of <br>
the phone that forwarded the call instead of the original external <br>
number?<br>
<br>
cheers,<br>
<br>
Daniel<br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
https://puck.nether.net/mailman/listinfo/cisco-voip<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
https://puck.nether.net/mailman/listinfo/cisco-voip</span></p>
</div>
</div>
</div></body></html>