<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
I am using SIP protocol for the firat and second dial peer. Would this
work?<br>
<br>
thanks<br>
<br>
Craig Staffin wrote:
<blockquote
cite="mid:9b76d88c0907230512q14a57b29u8bb2c6f6df2d816a@mail.gmail.com"
type="cite">For H323<br>
<br>
You will need to setup a H323 class and setup a max timout command of 2
or 3 secconds then apply this to the dial peer<br>
<br>
So setup<br>
<br>
Voice class H323 1<br>
timeout 3 (I can't remember the exact command off the top of my head)<br>
<br>
Dial peer 10 voip<br>
voice class h323 1<br>
<br>
Craig<br>
<br>
<br>
<div class="gmail_quote">On Thu, Jul 23, 2009 at 5:42 AM, ciscozest <span
dir="ltr"><<a moz-do-not-send="true"
href="mailto:ciscozest@gmail.com">ciscozest@gmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">I
have three dial-peers setup on CME 4.2 router<br>
<br>
first dial-peer is pointing to CCM Subscriber SIP trunk (VoIP)<br>
second dial-peer is pointing to CCM Publisher SIP trunk (VoIP)<br>
third dial-peer is pointing to PSTN (POTS)<br>
<br>
<br>
When both of CCM servers are down, it took very long time to use the
third dial-peer and establish the call. Is there a way to reduce the
dial-peer hunting or failover in the above scenario? Appreciate if
anyone can share your thought. Thank you<br>
<br>
regards,<br>
Denny<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a moz-do-not-send="true" href="mailto:cisco-voip@puck.nether.net"
target="_blank">cisco-voip@puck.nether.net</a><br>
<a moz-do-not-send="true"
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote>
</div>
<br>
</blockquote>
</body>
</html>