<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>That's the impression I got as well.<br><br>I'm just looking at the v7 interface now and there is two options for DHCP. Create/start/stop DHCP servers and Create/start/stop DHCP subnets.<br><br>There might be a way to use the CLI and "file view" commands to see the logs, etc. But that would hurt so much.<br><br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>"Bad grammar makes me [sic]" - Tshirt<br><br><br>----- Original Message -----<br>From: "Robert Kulagowski" <rkulagow@gmail.com><br>To: "Ccie" <pav.ccie@gmail.com><br>Cc: cisco-voip@puck.nether.net<br>Sent: Thursday, September 10, 2009 5:05:32 PM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] Monitoring DHCP utilization rates on UCM<br><br>Ccie wrote:<br>> UCM 7.0<br>> Does anybody know if there is a way to monitor the DHCP server <br>> integrated into UCM.<br>> I am trying to get a list of bindings/ measure utilization rate and <br>> curious if there Is a way to do it on UCM / RTMT<br><br>I'm 99% sure that I saw in this forum that using the built-in DHCP server <br>is strongly discouraged, with the above being one of the things that it lacks.<br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div></body></html>