<div>One way to do this is<br> <br>Create the translation rule, assign the rule to a profile, then assign the profile to the dial peer.<br> <br> <br>voice translation-rule 1<br> rule 1 /^030/ /901234567890/<br>!<br>!<br>voice translation-profile tlate<br>
translate called 1<br>!<br>!<br>dial-peer voice 501 pots<br> description - translate<br> translation-profile outgoing tlate<br> destination-pattern 030<br> port 0/1/0:15</div>
<div> </div>
<div><br><br> </div>
<div class="gmail_quote">On Mon, Sep 14, 2009 at 4:03 PM, Colin McAllister <span dir="ltr"><<a href="mailto:colinmca@gmail.com">colinmca@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Hi Dan,<br><br>Thanks.<br><br>They would be calling external numbers, for example :<br><br>Dialling 030 would dial 901234567890<br>
<br>There is of course a dial-peer catching 9T to an outgoing voice port.<br><br>Cheers,<br><font color="#888888"><br>Colin<br></font>
<div>
<div></div>
<div class="h5"><br>On 14/09/2009, Daniel <<a href="mailto:dan.voip@danofive.id.au">dan.voip@danofive.id.au</a>> wrote:<br>> Colin,<br>><br>> Depends if they're internal or external.<br>><br>> Using dial peers you can use translation rules and profiles to manipulate<br>
> the digits.<br>><br>> Or you could use the dial plan patterns, *"dialplan-pattern 1 588282..<br>> extension-length 6 extension-pattern 6682.. no-reg"<br>> *<br>> Give an example of what you are trying to do.<br>
><br>> cheers,<br>><br>> Dan<br>><br>><br>><br>> On Mon, Sep 14, 2009 at 3:42 PM, Colin McAllister <<a href="mailto:colinmca@gmail.com">colinmca@gmail.com</a>>wrote:<br>><br>>> My first post to the list, hello everyone - please be gentle!<br>
>><br>>> I'm about to decomission a site this morning (uk) that has a small<br>>> office linked through it - causing the local gateway to go into SRST<br>>> until I can get QOS enabled on it's backup link.<br>
>><br>>> The local users are used to dialling three digit short-codes for a few<br>>> frequently used numbers. Is there any way to setup these in SRST mode?<br>>><br>>> Thanks for any help you can offer.<br>
>><br>>> Regards,<br>>><br>>> Colin<br>>><br>>> --<br>>> Sent from my mobile device<br>>> _______________________________________________<br>>> cisco-voip mailing list<br>
>> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
>><br>><br><br></div></div>--<br>
<div>
<div></div>
<div class="h5">Sent from my mobile device<br></div></div></blockquote></div><br>