<HTML>
<HEAD>
<TITLE>Re: [cisco-voip] Sending Digits from a Script to a Unity Mailbox</TITLE>
</HEAD>
<BODY>
<FONT SIZE="4"><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:14.0px'><B>I want to transfer callers to an outside line that requires a long distance code. The long distance code requires a two (2) or three (2) second pause between the dialing of the number and the request for the long distance code. I can do this in Unity 5.x with the Alternate Contact Number option under Caller Input. Something that neither Call Manager or IPCC seem to be able to do. For instance, I can put in the digit string 917757727666,,,9009# for the Alternate Contact Number and assign it to Key 1. I have tested this manually and it works every time. I would like this to be transparent to the calling party and would be able to use a single Unity mailbox for up to nine (9) or ten (10) different people and let the IPCC script decide which digit to pass to the mailbox based on the calling number coming into the script. So, the flow would be something like this:<BR>
<BR>
Caller calls a DID or is transferred to that extension.<BR>
Extension is set to call forward all to an IPCC route point<BR>
Calling number is evaluated by IPCC in a series of IF statements to determine which digit to pass to Unity<BR>
Caller is transferred to Unity based on the evaluation of the IF statements<BR>
IPCC then sends the correct digit for Caller Input which then forwards the caller to the appropriate external number<BR>
<BR>
Let me know if additional info is needed. Thank You...<BR>
</B></SPAN></FONT></FONT><FONT FACE="Verdana, Helvetica, Arial"><B><FONT SIZE="2"><SPAN STYLE='font-size:10.0px'>-- <BR>
Jim Reed<BR>
Technology Wrangler<BR>
Swift Communications, Inc.<BR>
970-683-5646 (Direct)<BR>
775-772-7666 (Cell)<BR>
<BR>
</SPAN></FONT><FONT SIZE="1"><SPAN STYLE='font-size:9.0px'><I>Quando omni flunkus moritati<BR>
</I>"When all else fails, play dead"<BR>
Red Green - President: Possum Lodge<BR>
(Thanks for this one, Bill W.)<BR>
</SPAN></FONT></B><SPAN STYLE='font-size:12.0px'><BR>
<BR>
<BR>
On 10/1/09 11:27 AM, "Wes Sisk" <wsisk@cisco.com> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'>How about a little more insight on what products, call flows, and functions you are using?<BR>
<BR>
In general:<BR>
<BR>
Consult Transfer:<BR>
answer inbound call<BR>
initiate transfer<BR>
(once this call goes into connected state it is technically possible to pass DTMF to the destination)<BR>
complete transfer<BR>
at this point the transferring party is completely out the call flow and cannot pass DTMF to anyone<BR>
<BR>
Blind Transfer:<BR>
Answer inbound call<BR>
initiate transfer and specify destination<BR>
In this scenario there is no opportunity to pass DTMF to the destination<BR>
<BR>
/Wes<BR>
<BR>
On Thursday, October 01, 2009 12:33:40 PM, Jim Reed <jreed@swiftnews.com> <a href="mailto:jreed@swiftnews.com"><mailto:jreed@swiftnews.com></a> wrote:<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'> Sending Digits from a Script to a Unity Mailbox </SPAN><FONT SIZE="4"><SPAN STYLE='font-size:14.0px'><B>Okay, all you geniuses out there -- and you know who you are -- here is what I am wondering if one can do.<BR>
<BR>
I know I can transfer a caller from a script directly to a Unity mailbox, call handler, etc. What I would like to do is wait two (2) seconds and send a digit to that mailbox, call handler, etc., from the script just as if the caller had pressed a digit for caller input. Can this be done or if once the initial transfer is done is there no longer any communication possible between the script and Unity?<BR>
<BR>
Thank You...<BR>
</B></SPAN></FONT><B><FONT SIZE="2"><SPAN STYLE='font-size:10.0px'>-- <BR>
Jim Reed<BR>
Technology Wrangler<BR>
Swift Communications, Inc.<BR>
970-683-5646 (Direct)<BR>
775-772-7666 (Cell)<BR>
<BR>
Quando omni flunkus moritati<BR>
"When all else fails, play dead"<BR>
Red Green - President: Possum Lodge<BR>
(Thanks for this one, Bill W.)<BR>
<BR>
</SPAN></FONT></B><SPAN STYLE='font-size:12.0px'> <BR>
<BR>
<HR ALIGN=CENTER SIZE="4" WIDTH="90%"><BR>
_______________________________________________<BR>
cisco-voip mailing list<BR>
cisco-voip@puck.nether.net<BR>
https://puck.nether.net/mailman/listinfo/cisco-voip<BR>
<BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'><BR>
<BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'><BR>
<BR>
</SPAN></FONT>
</BODY>
</HTML>