<p>Hmm that does not sound good<br> <br>This is with the default settings <br> <br>rtp payload-type nte 101<br>rtp payload-type nse 100<br> <br>which don't show up in the config. Could there be any reason why the router is not able to use 101 below are my dial peers<br>
<br>dial-peer voice 100 voip<br> description AA Publisher<br> preference 1<br> destination-pattern 1..<br> voice-class h323 50<br> session target ipv4:10.1.80.10<br> dtmf-relay h245-alphanumeric<br> codec g711ulaw<br> no vad<br>
!<br>dial-peer voice 1000 voip<br> description incoming Call<br> translation-profile incoming aa<br> preference 1</p>
<p> incoming called-number 6784442454</p>
<p> dtmf-relay rtp-nte<br> codec g711ulaw<br> ip qos dscp cs5 media<br> ip qos dscp cs5 signaling<br> no vad<br>!<br>dial-peer voice 101 voip<br> description AA Subscriber<br> preference 2<br> destination-pattern 1..<br>
voice-class h323 50<br> session target ipv4:10.1.80.11<br> dtmf-relay h245-alphanumeric<br> codec g711ulaw<br> no vad<br>!<br>dial-peer voice 2000 voip<br> description outbound<br> translation-profile outgoing addone<br>
preference 1<br> destination-pattern .T</p>
<p> progress_ind setup enable 3<br> progress_ind progress enable 8<br> session protocol sipv2<br> session target dns:<a href="http://did.voip.les.net">did.voip.les.net</a></p>
<p> dtmf-relay rtp-nte<br> codec g711ulaw</p>
<p>!</p>