NO. the reason this happens is that you have not purchased the PS-ALI service.<div><br></div><div>With out the PS-ALI service it will default to your billing number. Which as an Address associated to it.</div><div><br></div>
<div>if you want your DID's to go out...... you have to have the PS-ALI service and have setup the DID's to a location with the service.</div><div><br></div><div>If you're going to go that far........ I would look at CER or 911enable or Redsky.</div>
<div><br></div><div>Otherwise....... as Cisco would say....... working as designed (by the telcos)</div><div><br></div><div>Hope that helps.</div><div><br></div><div>Scott.<br><br><div class="gmail_quote">On Fri, Oct 30, 2009 at 1:49 PM, Lund, John C. <span dir="ltr"><<a href="mailto:LUNDJC@uwec.edu">LUNDJC@uwec.edu</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
<div lang="EN-US" link="blue" vlink="purple">
<div>
<p class="MsoNormal">Hi,</p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">We purchased a PRI (Cisco 2851 Gateway) from ATT, and while
testing I find out the PSAP only sees the BTN when I make a test 911 call.
I called the ATT trouble line and they told me they never block the calling
number and that it is configurable on each PBX.</p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">Are they correct and is it a setting I can change to allow
the PSAP to see individual DIDs? </p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">CUCM 7.02</p>
<p class="MsoNormal">2851 MGCP</p>
<p class="MsoNormal">NM-4VWIC-MBRB / VWIC2-1MFT-T1E1-T1</p>
<p class="MsoNormal"> </p>
<p class="MsoNormal"> </p>
<p class="MsoNormal"> </p>
<p class="MsoNormal"><span style="font-size:10.5pt;font-family:Consolas">Thanks,</span></p>
<p class="MsoNormal"><span style="font-size:10.5pt;font-family:Consolas"> </span></p>
<p class="MsoNormal"><span style="font-size:10.5pt;font-family:Consolas">John </span></p>
<p class="MsoNormal"><span style="font-size:10.5pt;font-family:Consolas"> </span></p>
<p class="MsoNormal"> </p>
</div>
</div>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>