We use UCCE 7.2, which has a solution for remote agents, using analog phones.<br><br>The config requires that ICM use a FXS "phone" as a target, which is connected directly to a FXO port on a voice gateway. The IOS config from the setup doc directs that FXO port to be plar opx <PSTN destination>, then a pots dial-peer pointing to the outbound PRI.<br>
<br>However, my PSTN gateways are all MGCP (and I'll have to install an FXO vwic somewhere).<br><br>Can I set up the PLAR through MGCP and have the CUCM route the call through the MGCP-controlled PRI?<br><br>If not, can I set up the FXO plar as H.323 and then route it out the MGCP PRI?<br clear="all">
<br>-- <br>Dave Wolgast<br>Livonia, NY<br>