outbound is pots and the FXO / PRI / etc Port<div><br></div><div>inbound is VoIP and it's the CM ip address.</div><div><br></div><div>Scott<br><br><div class="gmail_quote">On Sat, Nov 7, 2009 at 11:26 AM, anand <span dir="ltr"><<a href="mailto:anand.eee@gmail.com">anand.eee@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">Hi.<br><br>I am very new to configuring CISCO UNIFIED COMMUNICATIONS MANGER (CUCM).<br><br>I have CUCM 6.1 on central site.I have connected CUCM , phone and router(H323 gateway) to the switch.All the devices have ip addres from 10.10.10.1-31 with sunet mask of /27.<br>
<br>On the remote site i have router(h323 gateway) , phone connected to switch.All the devices are on the network 10.10.10.33-63 with a subnet mask of /27.I want to register all the phones with call manger in the central site.<br>
<br>Both the gateways are connected back to back.<br><br>My question is on the remote site gateway, while configuring the dial peer session target which ip address should i give?<br><br>Should i give the ip address of gateaway's ethernet interface or callmanger ip address. <br>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br></div>