<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">For one phone this is entirely possible. Your original example however included multiple phones going offhook and hearing the prompt at the same time. When you call to a shared line or broadcast line group only the first phone to answer will get the call. Outside of a conference bridge all calls are one-to-one, not one-to-many.<div><br></div><div>What you are talking about with multiple phones is the same as a broadcast page. You will be better off sending on a multicast source and using the XML SDK to trigger the phones to listen to the multicast stream. As someone else pointed out there are limitations to how many outbound calls you can make at a time. Alternatively you could start a Meetme conference from the IVR (maybe?) and use CTI control of the phones to make them dial into the conference.</div><div><br></div><div><div>
<span class="Apple-style-span" style="border-collapse: separate; color: rgb(0, 0, 0); font-family: Helvetica; font-size: medium; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-align: auto; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-border-horizontal-spacing: 0px; -webkit-border-vertical-spacing: 0px; -webkit-text-decorations-in-effect: none; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px; "><div>-Ryan</div></span>
</div>
<br><div><div>On Nov 10, 2009, at 6:12 PM, Jim Reed wrote:</div><br class="Apple-interchange-newline"><div>
<font size="4"><font face="Verdana, Helvetica, Arial"><span style="font-size:14.0px"><b>So you’re also saying that there is no method of having a script dial an extension and play a prompt when that person answers? Prompts can only be played for calls “inbound” to the script?<br>
<br>
Thank You...<br>
</b></span></font></font><font face="Verdana, Helvetica, Arial"><b><font size="2"><span style="font-size:10.0px">-- <br>
Jim Reed<br>
Technology Wrangler<br>
Swift Communications, Inc.<br>
970-683-5646 (Direct)<br>
775-772-7666 (Cell)<br>
<br>
</span></font><font size="1"><span style="font-size:9.0px"><i>“Not only is it not right.<br>
It’s not even wrong.”<br>
</i> The Pauli Proverb<br>
Wolfgang Pauli<br>
</span></font></b><span style="font-size:12.0px"><br>
<br>
On 11/10/09 3:39 PM, "VoiceNoob" <<a href="mailto:voicenoob@gmail.com">voicenoob@gmail.com</a>> wrote:<br>
<br>
</span></font><blockquote><font face="Verdana, Helvetica, Arial"><font size="4"><span style="font-size:14.0px">The hunt group is working as designed. There is now way to do what you are doing in the current versions of CUCM.<br>
<br>
<br>
</span></font><span style="font-size:12.0px"><br>
</span><font size="4"><span style="font-size:13.0px"><b>From:</b> <font color="#0000FF"><u><a href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a></u></font> [<font color="#0000FF"><u><a href="mailto:cisco-voip-bounces@puck.nether.net">mailto:cisco-voip-bounces@puck.nether.net</a></u></font>] <b>On Behalf Of </b>Jim Reed<br>
<b>Sent:</b> Tuesday, November 10, 2009 4:28 PM<br>
<b>To:</b> <font color="#0000FF"><u><a href="mailto:cisco-voip@puck-nether.net">cisco-voip@puck-nether.net</a></u></font>; <font color="#0000FF"><u><a href="mailto:ask-icd-ivr-support@external.cisco.com">ask-icd-ivr-support@external.cisco.com</a><br>
</u></font><b>Subject:</b> [cisco-voip] Poor Man's Intercom<br>
</span></font><span style="font-size:12.0px"> <br>
</span><font color="#0000FF"><font size="4"><span style="font-size:13.0px"><b><u><a href="http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00807f3301.shtml">http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00807f3301.shtml</a><br>
</u></b></span></font></font><font size="4"><span style="font-size:13.0px"><b> <br>
Has anyone tried this? Any way to make it work with multiple phones simultaneously. I tried putting a different extension — 32200 through 32203 — on four (4) separate phones. I set the extension on each phone to Auto Answer with Speakerphone. I then put those phones in a Line Group with a Distribution Algorithm of Broadcast. I then set up a Hunt Pilot that points to that Line Group. When I dial the Hunt Pilot, the first phone in the group answers, the other three (3) disconnect — aka hang up — and then the phone that answered goes to a fast busy after a few seconds. If I dial the 32200 through 32203 individually, the “intercom” effect works as it should. Anyone know of a way to make this work on multiple phones simultaneously or is it just not doable. Just another of those weird thoughts that creep into this old and feeble mind now and then. I’m also thinking of writing scripts that step through extensions with pre-recorded emergency warnings like “Evacuate the building immediately”, etc., so when the route point is dialed it touches every phone in the building. Anyone done anything similar. Thank You.<br>
</b></span></font><b><font size="1"><span style="font-size:9.0px">-- <br>
Jim Reed<br>
Technology Wrangler<br>
Swift Communications, Inc.<br>
970-683-5646 (Direct)<br>
775-772-7666 (Cell)<br>
<br>
<i>“Not only is it not right.<br>
It’s not even wrong.”<br>
</i> The Pauli Proverb<br>
Wolfgang Pauli<br>
</span></font></b><span style="font-size:12.0px"><br>
</span></font></blockquote><font face="Verdana, Helvetica, Arial"><span style="font-size:12.0px"><br>
<br>
</span></font>
</div>
_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div><br></div></body></html>