I was thinking the same. Also does the provider require Software Select features? Mega-com...<br><br><br clear="all">Best Regards,<br><br>Mike Lydick<br><br><br>
<br><br><div class="gmail_quote">On Mon, Nov 30, 2009 at 6:30 PM, Scott Voll <span dir="ltr"><<a href="mailto:svoll.voip@gmail.com">svoll.voip@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Can you leave it international and strip the 011?<div><div></div><div class="h5"><div><br></div><div><br><br><div class="gmail_quote">On Mon, Nov 30, 2009 at 3:16 PM, Jonathan Charles <span dir="ltr"><<a href="mailto:jonvoip@gmail.com" target="_blank">jonvoip@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">OK, here's one that is stumping me...<br>
<br>
CUCM 7.0, H.323 Gateways with 3 PRIs.<br>
<br>
We can call all over Europe, Oceania, Asia... but not the UK.<br>
<br>
Calls go out:<br>
<br>
ch = primary-ni interface = User<br>
Nov 30 17:07:21.704 CST: ISDN Se0/1/0:23 Q931: TX -> SETUP pd = 8<br>
callref = 0x147B<br>
Bearer Capability i = 0x8090A2<br>
Standard = CCITT<br>
Transfer Capability = Speech<br>
Transfer Mode = Circuit<br>
Transfer Rate = 64 kbit/s<br>
Channel ID i = 0xA98397<br>
Exclusive, Channel 23<br>
Calling Party Number i = 0x2181, '8475552096'<br>
Plan:ISDN, Type:National<br>
Called Party Number i = 0x91, '011441787883195'<br>
Plan:ISDN, Type:International<br>
Nov 30 17:07:21.744 CST: ISDN Se0/1/0:23 Q931: RX <- CALL_PROC pd = 8<br>
callref = 0x947B<br>
Channel ID i = 0xA98397<br>
Exclusive, Channel 23<br>
MC003137#<br>
Nov 30 17:07:21.744 CST: ISDN Se0/1/0:23 Q931: RX <- PROGRESS pd = 8<br>
callref = 0x947B<br>
Cause i = 0x829F - Normal, unspecified<br>
<br>
<br>
And fail.<br>
<br>
On the Route Pattern, we are forcing plan and type to unknown/unknown;<br>
telco came in and made these calls successfully from the smartjacks; I<br>
have a dial peer invoking a translation profile:<br>
<br>
<br>
!<br>
voice translation-rule 2<br>
rule 1 // // type international unknown plan isdn unknown<br>
!<br>
!voice translation-profile UK<br>
translate called 2<br>
!<br>
<br>
<br>
!<br>
dial-peer voice 60 pots<br>
translation-profile outgoing UK<br>
destination-pattern 01144T<br>
port 0/0/0:23<br>
prefix 01144<br>
!<br>
<br>
There are no transformation patterns on the system, there are no<br>
translation patterns on the system; every other international call<br>
succeeds without any issue (plan and type are unknown)...<br>
<br>
<br>
Any ideas? I seriously have no idea where this plan and type are<br>
coming from, or how to get rid of them...<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div><br></div>
</div></div><br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br>