Hi,<br><br>I have a VG224 that works fine for some time (around 1-2 weeks) but then after some time some of the voice ports behave strange.<br>PORT CODEC VAD VTSP STATE VPM STATE<br>============== ======== === ==================== ======================<br>
2/2 - - - FXSLS_PARK <br>2/15 g711ulaw n S_SETUP_REQ_PROC FXSLS_ONHOOK <br><br>and <br><br>Telephony call-legs: 2<br>SIP call-legs: 0<br>H323 call-legs: 0<br>
Call agent controlled call-legs: 0<br>SCCP call-legs: 0<br>Multicast call-legs: 0<br>Total call-legs: 2<br>0 : 1752 1038924670ms.1 +-1 pid:0 Originate connecting<br> dur 00:00:00 tx:0/0 rx:0/0<br> Tele 2/15 (1752) [2/15] tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm<br>
<br>0 : 1756 1039060400ms.1 +-1 pid:0 Originate connecting<br> dur 00:00:00 tx:0/0 rx:0/0<br> Tele 2/15 (1756) [2/15] tx:0/0/0ms None noise:0 acom:0 i/0:0/0 dBm<br><br>Telephony call-legs: 2<br>SIP call-legs: 0<br>H323 call-legs: 0<br>
Call agent controlled call-legs: 0<br>SCCP call-legs: 0<br>Multicast call-legs: 0<br>Total call-legs: 2<br><br>even though no call is active or trying to connect.<br>It's connected to CUCM 7.0(2) with SCCP, running IOS 12.4(25a) (did try actually a few of them but the problem persists). After a restart everything works fine for, again a random period of days (1-2 week) and then fails again. VG224 replaced a few ATA186 which didn't experience any problems whatsoever. I have no ideas where to look next?<br>
<br>I have another VG224 (running same IOS on the same CUCM, same configuration) on another location which works fine for the last 6 moths.<br><br>Best regards<br>