Our normal disk swap procedure is<br>1. power off the server<br>2. pull disk 1 out<br>3. if upgrade fails, power off the server again, pull out disk 0, and put disk 1 back to the original tray, power on the server and then put disk 0 back to tray0<br>
<br>Curious to know<br>1. what is going to happen if I pull out both disks and swap the disks, disk1 goes to the slot0, disk0 goes to slot1<br>1. what is going to happen if I pull out both disks and insert them to another server<br>
<br>Thanks in advance.<br>