<div>Hello Folks</div>
<div> </div>
<div>I am trying to setup dial via office on my cisco unified mobile advantage. I have everything else setup and working but dial via office when you go to connection status on my iphone cisco mobile client says "error" eventually it gets stuck in an initializing then updating loop before awhile. The rest are online. I followed the guide published on ciscos webpage for setting up cuma with cucm. I configured the cucm as per the screenshots. I have a 2821 router as my gateway with the dial peer for incoming as shown below.</div>
<div> </div>
<div>any assistance would be really helpful thanks again!</div>
<div> </div>
<div> </div>
<div>dial-peer voice 10001 voip<br> description incoming Calldid<br> translation-profile incoming incomingdid<br> preference 1<br> incoming called-number 678456329.<br> dtmf-relay rtp-nte<br> codec g711ulaw<br> no vad</div>
<div> </div>
<div>Cisco2821#test voice trans 3 6784563298<br>Matched with rule 3<br>Original number: 6784563298 Translated number: 108<br>Original number type: none Translated number type: none<br>Original number plan: none Translated number plan: none</div>
<div>Cisco2821#</div>