<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;"><DIV>Hi All ,</DIV>
<DIV> </DIV>
<DIV>Problem Details: i've installed an e1 card on cisco router 2811 to link the router to pbx<BR>pbx1---->e1---->router1-->wan--->rouer2--->fxo--->pbx2</DIV>
<DIV>the call from pbx 1 to pbx 2 is working<BR>the call from pbx2 to pbx1 is not working</DIV>
<DIV> </DIV>
<DIV>the configuration on router 1</DIV>
<DIV> </DIV>
<DIV>voice translation-rule 1<BR> rule 1 /03\(...\)/ /\1/<BR>!<BR>!<BR>voice translation-profile outgoing<BR> translate called 1</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>controller E1 0/3/0<BR> framing NO-CRC4 <BR> ds0-group 0 timeslots 1-15,17-31 type r2-digital dtmf dnis<BR>!<BR>voice-port 0/3/0:0<BR> cptone EG</DIV>
<DIV> </DIV>
<DIV>dial-peer voice 9 pots<BR> translation-profile outgoing outgoing<BR> destination-pattern 03...<BR> port 0/3/0:0</DIV>
<DIV><BR> dial-peer voice 10 voip<BR> destination-pattern 01....<BR> session target ipv4:10.0.178.18<BR> dtmf-relay h245-alphanumeric<BR> codec g711ulaw<BR></DIV>
<DIV>please help me to solve this issue</DIV>
<DIV> </DIV>
<DIV>Thanks,</DIV>
<DIV>Hady<BR></DIV></td></tr></table><br>