What do u mean by not working. Please explain? Also post the config of both router<br><br><div class="gmail_quote">On Mon, Dec 21, 2009 at 2:51 AM, hady salah ashour <span dir="ltr"><<a href="mailto:eng_hady1@yahoo.com">eng_hady1@yahoo.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><table cellspacing="0" cellpadding="0" border="0"><tbody><tr><td valign="top" style="font:inherit"><div>Hi All ,</div>
<div> </div>
<div>Problem Details: i've installed an e1 card on cisco router 2811 to link the router to pbx<br>pbx1---->e1---->router1-->wan--->rouer2--->fxo--->pbx2</div>
<div>the call from pbx 1 to pbx 2 is working<br>the call from pbx2 to pbx1 is not working</div>
<div> </div>
<div>the configuration on router 1</div>
<div> </div>
<div>voice translation-rule 1<br> rule 1 /03\(...\)/ /\1/<br>!<br>!<br>voice translation-profile outgoing<br> translate called 1</div>
<div> </div>
<div> </div>
<div>controller E1 0/3/0<br> framing NO-CRC4 <br> ds0-group 0 timeslots 1-15,17-31 type r2-digital dtmf dnis<br>!<br>voice-port 0/3/0:0<br> cptone EG</div>
<div> </div>
<div>dial-peer voice 9 pots<br> translation-profile outgoing outgoing<br> destination-pattern 03...<br> port 0/3/0:0</div>
<div><br> dial-peer voice 10 voip<br> destination-pattern 01....<br> session target ipv4:10.0.178.18<br> dtmf-relay h245-alphanumeric<br> codec g711ulaw<br></div>
<div>please help me to solve this issue</div>
<div> </div>
<div>Thanks,</div>
<div>Hady<br></div></td></tr></tbody></table><br>
<br>_______________________________________________<br>
cisco-voip mailing list<br>
<a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br></blockquote></div><br><br clear="all"><br>-- <br>Thanks,<br>Syed Khalid Ali<br><br>