<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Verdana
}
--></style>
</head>
<body class='hmmessage'>
<BR>
Hi, i wish you a better year than 2009.<BR>
<BR>
I have a problem with the following configuration. please help!!!!!!!!1<BR>
<BR>
PSTN -----> PBX (Nortel) --ISDN---> RTR 2821 ----->CallManager -----> IPPHONE<BR>
<BR>
<STRONG>I make a call form PBX to IPPHONE, i hear the ring, answered the call, but in the router the call is droped with user no answer.</STRONG><BR>
<BR>
*Jan 4 16:51:03.165: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x4E00<BR> Bearer Capability i = 0x8090A3<BR> Standard = CCITT<BR> Transfer Capability = Speech<BR> Transfer Mode = Circuit<BR> Transfer Rate = 64 kbit/s<BR> Channel ID i = 0xA9839F<BR> Exclusive, Channel 31<BR> Progress Ind i = 0x8581 - Call not end-to-end ISDN, may have in-band info<BR> Calling Party Number i = 0x0080, '5559996600'<BR> Plan:Unknown, Type:Unknown<BR> Called Party Number i = 0x81, '4965'<BR> Plan:ISDN, Type:Unknown<BR> Sending Complete<BR>
*Jan 4 16:51:03.181: ISDN Se0/0/0:15 SERROR: isdn_get_name_from_gtd: false ret<BR>*Jan 4 16:51:03.181: ISDN Se0/0/0:15 SERROR: process_pri_simple: NO name in GTD<BR>*Jan 4 16:51:03.181: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xCE00<BR> Channel ID i = 0xA9839F<BR> Exclusive, Channel 31<BR>*Jan 4 16:51:18.217: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0xCE00<BR> Cause i = 0x8092 - No user responding<BR>*Jan 4 16:51:18.245: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x4E00<BR>*Jan 4 16:51:18.249: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xCE00<BR>
<BR>
<STRONG>I simulate call usinf csim start IPPHONE, i answared the call and i see the established call</STRONG><BR>
<BR>
MXODFVPNNEOCCM#sh call act voi com<BR> <callID> A/O FAX T<sec> Codec type Peer Address IP R<ip>:<udp><BR>Total call-legs: 1<BR> 220 ORG T0 g729r8 VOIP P4965 10.15.180.137:18236<BR>
<BR>
<STRONG>If i make a call for IPPHONE to PBX it works</STRONG><BR>
<BR>
MXODFVPNNEOCCM#<BR>*Jan 4 16:56:31.837: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x16 is 0x0 0x0, Calling num 4965<BR>*Jan 4 16:56:31.841: ISDN Se0/0/0:15 Q931: Sending SETUP callref = 0x00AC callID = 0x802D switch = primary-qsig interface = User<BR>*Jan 4 16:56:31.841: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x00AC<BR> Bearer Capability i = 0x8090A3<BR> Standard = CCITT<BR> Transfer Capability = Speech<BR> Transfer Mode = Circuit<BR> Transfer Rate = 64 kbit/s<BR> Channel ID i = 0xA98381<BR> Exclusive, Channel 1<BR> Calling Party Number i = 0x0081, '4965'<BR> Plan:Unknown, Type:Unknown<BR> Called Party Number i = 0x80, '2071'<BR> Plan:Unknown, Type:Unknown<BR>*Jan 4 16:56:31.921: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x80AC<BR> Channel ID i = 0xA98381<BR> Exclusive, Channel 1<BR>*Jan 4 16:56:31.925: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8 callref = 0x80AC<BR> Progress Ind i = 0x8182 - Destination address is non-ISDN<BR>*Jan 4 16:56:47.273: ISDN Se0/0/0:15 Q931: RX <- CONNECT pd = 8 callref = 0x80AC<BR> Progress Ind i = 0x8182 - Destination address is non-ISDN<BR>*Jan 4 16:56:47.273: ISDN Se0/0/0:15 SERROR: isdn_init_name_iecs: Connected name not supported for this switch type<BR>*Jan 4 16:56:47.273: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now connected to 2071 N/A<BR>*Jan 4 16:56:47.273: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now connected to 2071 N/A<BR>*Jan 4 16:56:47.273: ISDN Se0/0/0:15 Q931: TX -> CONNECT_ACK pd = 8 callref = 0x00AC<BR>*Jan 4 16:57:34.045: %ISDN-6-DISCONNECT: Interface Serial0/0/0:0 disconnected from 2071 , call lasted 46 seconds<BR>*Jan 4 16:57:34.049: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x00AC<BR> Cause i = 0x8090 - Normal call clearing<BR>*Jan 4 16:57:34.077: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x80AC<BR>*Jan 4 16:57:34.077: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x00AC<BR>
<BR>
<BR>
<BR>                                            <br /><hr />Keep your friends updated— <a href='http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_5:092010' target='_new'>even when you’re not signed in.</a></body>
</html>