<HTML>
<HEAD>
<TITLE>Re: [cisco-voip] 911 operator gets billing number instead of DID</TITLE>
</HEAD>
<BODY>
<FONT SIZE="4"><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:14.0px'><B>Sorry, forgot to add the following — If you want to send out each individual’s DID, in the Route List Detail Configuration section, set Use Calling Party’s External Phone Number Mask to on and do not put anything in the Calling Party Transform Mask section. Whatever you put in the External Phone Number Mask on the line appearance configuration will go out as the Caller ID. I believe if you put nothing in that field, their extension will go out as the Caller ID so if you have line appearances that will make outbound calls but don’t have a specific DID associated with that line, you may want to put your main number in there.<BR>
</B></SPAN></FONT></FONT><FONT FACE="Verdana, Helvetica, Arial"><B><FONT SIZE="2"><SPAN STYLE='font-size:10.0px'>-- <BR>
Jim Reed<BR>
Swift Communications, Inc.<BR>
970-683-5646 (Direct)<BR>
775-772-7666 (Cell)<BR>
<BR>
</SPAN></FONT><FONT SIZE="1"><SPAN STYLE='font-size:9.0px'><I>“Somewhere, something incredible<BR>
is waiting to be known.”<BR>
</I> Dr. Carl Sagan<BR>
</SPAN></FONT></B><SPAN STYLE='font-size:12.0px'><BR>
<BR>
<BR>
On 1/7/10 11:44 AM, "Jim Reed" <jreed@swiftnews.com> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><FONT SIZE="4"><SPAN STYLE='font-size:14.0px'><B>You said the Magic Word — Qwest! Qwest will override what you send out. Not sure what version of Call Manager you’re on but for locations that just want a single caller ID for that location, we put the number under the Calling Party Transform Mask in the Route List Detail Configuration section. We have a couple of locations that want the individual DIDs to go out so we configure that under External Phone Number Mask on the line appearance on the individual phones.<BR>
</B></SPAN></FONT><B><FONT SIZE="2"><SPAN STYLE='font-size:10.0px'>-- <BR>
Jim Reed<BR>
Swift Communications, Inc.<BR>
970-683-5646 (Direct)<BR>
775-772-7666 (Cell)<BR>
<BR>
</SPAN></FONT><FONT SIZE="1"><SPAN STYLE='font-size:9.0px'><I>“Somewhere, something incredible<BR>
is waiting to be known.”<BR>
</I> Dr. Carl Sagan<BR>
</SPAN></FONT></B><SPAN STYLE='font-size:12.0px'><BR>
<BR>
<BR>
On 1/7/10 11:02 AM, "Rossella Mariotti-Jones" <<FONT COLOR="#0000FF"><U>rossella.mariotti.jones@chemeketa.edu</U></FONT>> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'>Hi all, we are having an issue with our outgoing calls to 911 to where the operator sees our trunk billing number instead of our DID number. I can watch the call going out through my mgcp gateway to Qwest and I see the correct DID under Calling Party Number and if we call the 911 supervisor or anybody else our DID shows up correctly just not to 911. Has anyone seen this before? Is anyone in my area having the same issue with the same setup? Scott? ;-)<BR>
TIA.<BR>
<BR>
</SPAN><FONT SIZE="4"><SPAN STYLE='font-size:13.0px'>Rossella<BR>
</SPAN></FONT><SPAN STYLE='font-size:12.0px'> <BR>
<BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'><BR>
<BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'><BR>
<BR>
</SPAN></FONT>
</BODY>
</HTML>