<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body style="font-size: small; font-family: Arial;" bgcolor="#ffffff"
text="#000000">
If you have the switch set to auto it would be a good idea to have the
servers set to auto as well.<br>
<br>
'set network nic eth0 auto en'. However, I am guessing your Sub is
already set to auto since last I checked, you cannot hardcode gigabit
on CUCM appliance model.<br>
<br>
Regards,<br>
Adam<br>
<span style="color: rgb(0, 0, 0);" class="headerSpan"><br>
<br>
------------Original Message--------------<br>
From: Charles <a class="moz-txt-link-rfc2396E" href="mailto:space_eclipse@yahoo.com"><space_eclipse@yahoo.com></a><br>
Sent: Tue, Jan 19, 2010 4:28:52 Pm<br>
To: Adam Frankel <a class="moz-txt-link-rfc2396E" href="mailto:afrankel@cisco.com"><afrankel@cisco.com></a><br>
CC: <br>
Subject: Re: [cisco-voip] SDLLink disconnect and how to correct this
issue?</span>
<blockquote
style="border: medium none ! important; padding-left: 0px ! important; padding-right: 0px ! important; margin-left: 0px ! important; margin-right: 0px ! important;"
cite="mid:259302.83269.qm@web33301.mail.mud.yahoo.com" type="cite">
<pre wrap="">Adam,
I found the duplex is full/100Mbs. My Pub and other Subs have a duplex of full/1000Mbs. I think this could be the issue. Our switch side speed is auto configured. What is the best way to change the speed in my troubeld SUB?
Regards,
-Charles.
--- On Tue, 1/19/10, Adam Frankel <a class="moz-txt-link-rfc2396E" href="mailto:afrankel@cisco.com"><afrankel@cisco.com></a> wrote:
> From: Adam Frankel <a class="moz-txt-link-rfc2396E" href="mailto:afrankel@cisco.com"><afrankel@cisco.com></a>
> Subject: Re: [cisco-voip] SDLLink disconnect and how to correct this issue?
> To: "Charles" <a class="moz-txt-link-rfc2396E" href="mailto:space_eclipse@yahoo.com"><space_eclipse@yahoo.com></a>
> Cc: <a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
> Date: Tuesday, January 19, 2010, 2:56 PM
> Domain name is probably insignificant
> to your SDL Links. Start by checking your speed/duplex
> settings on the switch as compared to the CCM using 'show
> network eth0 detail.' Also check RTMT for any core
> dumps, service crash, CPU pegging alerts.
>
> Most of the time it is a network issue though.
>
> Regards,
> Adam
>
> -------- Original Message --------
> Subject: [cisco-voip] SDLLink disconnect and how to correct
> this issue?
> From: Charles <a class="moz-txt-link-rfc2396E" href="mailto:space_eclipse@yahoo.com"><space_eclipse@yahoo.com></a>
> To: <a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
> Date: 1/19/10 3:26 PM
>
> Sometimes, I get SDLLink disconnect between the CUCM 7.x
> Pub and Sub1. When I check the configs, I see there is a
> domain name configured in the SUB1. I checked other
> connectivities, and everything looks ok. I wonder is this
> domain name causing this issue?
>
> -Charles.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> <a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
> <a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
> _______________________________________________
> cisco-voip mailing list
> <a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
> <a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
>
</pre>
</blockquote>
</body>
</html>