<div>Thanks, 'progress_ind setup enable 3' was the fix on the voip dial-peer.</div>
<div> </div>
<div><br><br> </div>
<div class="gmail_quote">On Thu, Feb 4, 2010 at 2:10 PM, Leslie Meade <span dir="ltr"><<a href="mailto:lmeade@signal.ca">lmeade@signal.ca</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT: #ccc 1px solid; MARGIN: 0px 0px 0px 0.8ex; PADDING-LEFT: 1ex" class="gmail_quote">
<div lang="EN-US" vlink="purple" link="blue">
<div>
<p class="MsoNormal"><span style="COLOR: #1f497d; FONT-SIZE: 11pt">This page was of great help to me…</span></p>
<p class="MsoNormal"><span style="COLOR: #1f497d; FONT-SIZE: 11pt"> </span></p>
<p class="MsoNormal"><a href="http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094c33.shtml#voipcalls" target="_blank">http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094c33.shtml#voipcalls</a></p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">Leslie</p>
<p class="MsoNormal"><span style="COLOR: #1f497d; FONT-SIZE: 11pt"> </span></p>
<p class="MsoNormal"><span style="COLOR: #1f497d; FONT-SIZE: 11pt"> </span></p>
<p class="MsoNormal"><span style="COLOR: #1f497d; FONT-SIZE: 11pt"> </span></p>
<p class="MsoNormal"><b><span style="FONT-SIZE: 10pt">From:</span></b><span style="FONT-SIZE: 10pt"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Brian Schultz<br>
<b>Sent:</b> Thursday, February 04, 2010 11:23 AM<br><b>To:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><b>Subject:</b> [cisco-voip] First ring on inbound call to H323 Gateway</span></p>
<div>
<div></div>
<div class="h5">
<p class="MsoNormal"> </p>
<div>
<p class="MsoNormal">I just changed a 2821 voice gateway from MGCP to H.323 with CUCM 6.1. After the conversion, all inbound and outbound calls work fine. The only noticeable difference is that the inbound caller does not hear ringback on the first ring. So if the IP Phone user answers the call on the first ring, the inbound PSTN caller just hears the user answer and doesn't hear ringback. Not the end of the world, but I'm wondering if there is a dial-peer or voice-port setting to adjust this behavior? </p>
</div>
<div>
<p class="MsoNormal"> </p></div>
<div>
<p class="MsoNormal">2821 is running 12.4(15)T7 with PRI connection to PSTN. Standard pots and voip dialpeers:</p></div>
<div>
<p class="MsoNormal"> </p></div>
<div>
<p class="MsoNormal">dial-peer voice 1 pots<br> incoming called-number [0-8]...<br> direct-inward-dial<br> port 0/0/0:23<br>!</p></div>
<div>
<p class="MsoNormal">dial-peer voice 1000 voip<br> destination-pattern [0-8]...<br> voice-class h323 1<br> session target ipv4:10.128.110.11<br> dtmf-relay h245-alphanumeric<br> codec g711alaw<br> no vad</p></div>
<div>
<p class="MsoNormal"> </p></div>
<div>
<p class="MsoNormal"> </p></div>
<div>
<p class="MsoNormal">Any ideas?</p></div>
<div>
<p class="MsoNormal"> </p></div>
<div>
<p class="MsoNormal">Thanks,</p></div>
<div>
<p class="MsoNormal">Brian</p></div>
<div>
<p class="MsoNormal"> </p></div></div></div></div></div></blockquote></div><br>