<HTML>
<HEAD>
<TITLE>Independent PRIs -- Single Router</TITLE>
</HEAD>
<BODY>
<FONT SIZE="4"><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:14.0px'><B>Due to contract obligations, we need to connect PRIs from two (2) different vendors to a single router. I think I've got a fairly firm grasp on what needs to be done but thought I would run it by this group to see if I'm missing anything.<BR>
<BR>
Fortunately, I can have the DIDs from one PRI moved to the other so it's my intent to have all inbound calls one (1) PRI and all outbound calls on the other.<BR>
<BR>
Once the contract is up on the more expensive PRI, we'll contract for a second from the other vendor and bond all forty-six (46) channels together.<BR>
<BR>
My assumption is that I need only a single gateway address and just identify which interface (port) to use when the caller makes an outbound call. Everything is configured H323.<BR>
<BR>
Any advice, hints, tips, suggestions, etc., will be greatly appreciated. There will be a few analog devices off fxs ports but that is pretty much a no brainer. Just want to make sure I get things in Call Manager 4.2(3)sr4a and the 2851 router configured correctly.<BR>
<BR>
Thank You...<BR>
</B></SPAN></FONT></FONT><FONT FACE="Verdana, Helvetica, Arial"><B><FONT SIZE="2"><SPAN STYLE='font-size:10.0px'>-- <BR>
Jim Reed<BR>
Technology Wrangler<BR>
Swift Communications, Inc.<BR>
970-683-5646 (Direct)<BR>
775-772-7666 (Cell)<BR>
<BR>
</SPAN></FONT><FONT SIZE="1"><SPAN STYLE='font-size:9.0px'><I>“Did Adam and Eve<BR>
have navels?”<BR>
</I> --Martin Gardner<BR>
</SPAN></FONT></B><SPAN STYLE='font-size:12.0px'><BR>
</SPAN></FONT>
</BODY>
</HTML>