<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>this gives you some examples or at least psuedocode<br><br>http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/xsi/5_1/english/programming/guide/ip5_1apa.html<br><br>i'd use the execute sample, then use the dial option and dial your MWI on/off number.<br><br><br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><br><br>----- Original Message -----<br>From: "Bill Simon" <bills@psu.edu><br>To: "Cisco Voip" <cisco-voip@puck.nether.net><br>Sent: Friday, February 26, 2010 3:02:33 PM GMT -05:00 US/Canada Eastern<br>Subject: [cisco-voip] Manipulating MWI by XML<br><br>Does anybody know how to manipulate the MWI on a phone through an XML <br>command to the phone itself? For example, instruct it to turn on, off, <br>or blink. Sending an instruction to the phone to dial the MWI toggle <br>code configured in Call Manager is not suitable in this case.<br><br>Thanks<br>Bill<br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div></body></html>