<div>Last I looked at the developer's guide there's no way to change MWI on the IP phone via XML posts.</div>
<div><br clear="all">Matthew Saskin<br><a href="mailto:msaskin@gmail.com">msaskin@gmail.com</a><br>203-253-9571<br><br>July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run<br>Please support the Leukemia & Lyphoma Society<br>
<a href="http://pages.teamintraining.org/nyc/nyctri10/msaskin">http://pages.teamintraining.org/nyc/nyctri10/msaskin</a><br><br><br></div>
<div class="gmail_quote">On Fri, Feb 26, 2010 at 3:02 PM, Bill Simon <span dir="ltr"><<a href="mailto:bills@psu.edu">bills@psu.edu</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Does anybody know how to manipulate the MWI on a phone through an XML command to the phone itself? For example, instruct it to turn on, off, or blink. Sending an instruction to the phone to dial the MWI toggle code configured in Call Manager is not suitable in this case.<br>
<br>Thanks<br>Bill<br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
</blockquote></div><br>