<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>can you give us an idea of what you are trying to do?<br><br>you can use the execute elements to play a ring tone as well or any audio file on the TFTP server.<br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><br><br>----- Original Message -----<br>From: "Bill Simon" <bills@psu.edu><br>To: "Wes Sisk" <wsisk@cisco.com><br>Cc: "Cisco Voip" <cisco-voip@puck.nether.net><br>Sent: Friday, February 26, 2010 6:20:05 PM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] Manipulating MWI by XML<br><br>Wes Sisk wrote:<br>> right track. you can't control the MWI directly on the phone. however, <br>> you can remote control the phone to dial MWI on number so that CM will <br>> send MWI on down to the phone.<br>>><br>>> this gives you some examples or at least psuedocode<br>>><br>>> http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/xsi/5_1/english/programming/guide/ip5_1apa.html<br>>><br>>> i'd use the execute sample, then use the dial option and dial your MWI <br>>> on/off number.<br><br>Good suggestions but the dialing action that happens when you do Execute <br>URL="Dial:1999" is disruptive to other elements that I am pushing. I <br>may skip this idea. Basically I am looking for a visually-annoying <br>element to make the person look at the phone (there will also be an <br>annoying audio element, e.g. the "Cisco Techno" ringtone... just <br>kidding... maybe).<br><br>Bill<br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div></body></html>