I see. So a router in the middle is required then. Doesn't the CCM7 support it without the CUBE?<br><br>Thanks.<br><br><div class="gmail_quote">On Wed, Mar 3, 2010 at 9:48 PM, Dennis Heim <span dir="ltr"><<a href="mailto:Dennis.Heim@cdw.com">Dennis.Heim@cdw.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;"><div link="blue" vlink="purple" lang="EN-US"><div><p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);">You will probably end up having to use CUBE, instead of terminating the trunk to CCM.</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p><p class="MsoNormal"><span style="font-size: 10pt; color: rgb(31, 73, 125);">Dennis Heim<br>Network Voice Engineer<br>CDW Advanced Technology Services<br>
11711 N. Meridian Street, Suite 225<br>Carmel, IN 46032<br><br>317.569.4255 Office<br></span><span style="font-size: 10pt; color: black;">317.569.4201 Fax<br></span><span style="font-size: 10pt; color: rgb(31, 73, 125);">317.694.6070 Cell</span></p>
<p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"><a href="mailto:dennis.heim@cdw.com" title="mailto:dennis.heim@berbee.com" target="_blank"><span style="color: blue;">dennis.heim@cdw.com</span></a><br>
<a href="http://www.berbee.com/" title="http://www.berbee.com/" target="_blank"><span style="color: blue;">www.berbee.com</span></a></span><span style="color: rgb(31, 73, 125);"></span></p><p class="MsoNormal"><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p class="MsoNormal"><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> <a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net" target="_blank">cisco-voip-bounces@puck.nether.net</a>] <b>On Behalf Of </b>Jefflin Choi<br>
<b>Sent:</b> Wednesday, March 03, 2010 8:31 AM<br><b>To:</b> <a href="mailto:cisco-voip@puck.nether.net" target="_blank">cisco-voip@puck.nether.net</a><br><b>Subject:</b> [cisco-voip] CCM SIP connection to B2B getting fast busy</span></p>
<div><div></div><div class="h5"><p class="MsoNormal"> </p><p class="MsoNormal">Hi, <br><br>I'm trying to configure a SIP connection to a 3rd party B2B SIP device, then B2B will relay to a Huawei (SIP) device on the other end.<br>
topology:<br>IP Phones ------CCM7 -------(provider)--B2B---------Huawei---pstn<br><br>configuration:<br>CCM is configured with SIP trunk with ip address of the B2B and route pattern uses the SIP trunk configured. MTP required uncheck as of the moment. codec G711uLaw and No authentication required.<br>
<br>Problem:<br>Outgoing call from IP Phone to PSTN gets fast busy signal. When placed a sniffer in between CCM7 and B2B gateway, i didnt see any sip invite initiated by the CCM7. CCM7 and ip phones only have traffic reachability to B2B but not Huawei.<br>
The provider (B2B to pstn) was tested using altitude(as claimed by the customer) and works fine but we are testing using CCM7.<br><br>Question:<br>1> Am i right to use CCM trunk to connect to the B2B sip?<br>2> Any additional configs i need to configure? Misconfiguration?<br>
3>Should i expect SIP invite to be sent by CCM when call is triggered by ip phones?<br><br>Thanks,<br>Jeff</p></div></div></div></div></blockquote></div><br>