<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>ok, after some more reading, it looks like the default inbound dial peer won't work with SIP calls.<br><br>which makes more sense, the configuration should really happen on the terminating router, not the originating router.<br><br>thanks to Ed for some pointers.<br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><br><br>----- Original Message -----<br>From: "Lelio Fulgenzi" <lelio@uoguelph.ca><br>To: "cisco-voip voyp list" <cisco-voip@puck.nether.net><br>Sent: Friday, March 26, 2010 7:59:55 PM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] router to router (SCCP/h323 to SIP) calls don't work in SRST<br><br><style>p { margin: 0; }</style><div style="font-family: Verdana; font-size: 10pt; color: rgb(0, 0, 0);">ya know, I think I just answered my own question after sending this off....<br><br>i'm guessing I need a more specific dial-peer on the far end router which more closely matches the dial-peer on local router.<br><br>so, something like this? the question is, can i use the router address or should i use the CUE ip address?<br><br>hmmm, something to try later<br><br><div style="margin-left: 40px;"><hr style="width: 100%; height: 2px;">Router A:<br>
!<br>
dial-peer voice 37063 voip<br> description Cisco Unity Express AutoAttendant (Default)<br> destination-pattern 37063<br> session protocol sipv2<br> session target ipv4:10.104.13.66<br> dtmf-relay sip-notify<br> codec g711ulaw<br> no vad<br>!<br>dial-peer voice 11111 voip<br> description Wild Card to vgw-jnhn-b<br> destination-pattern [1234567]....<br> session target ipv4:10.104.13.202<br>!<br>dial-peer voice 37000 voip<br>
description SIP Wild Card to vgw-jnhn-b<br>
destination-pattern 37...<br> session protocol sipv2<br>
session target ipv4:10.104.13.202 <span style="font-weight: bold;">(OR CUE IP address?)</span><br> dtmf-relay sip-notify<br>
codec g711ulaw<br>
no vad<br>
!<br></div><hr style="width: 100%; height: 2px; margin-left: 40px;"><br><br><br>----- Original Message -----<br>From: "Lelio Fulgenzi" <lelio@uoguelph.ca><br>To: "cisco-voip voyp list" <cisco-voip@puck.nether.net><br>Sent: Friday, March 26, 2010 7:53:10 PM GMT -05:00 US/Canada Eastern<br>Subject: [cisco-voip] router to router (SCCP/h323 to SIP) calls don't work in SRST<br><br><style>p { margin: 0; }</style><div style="font-family: Verdana; font-size: 10pt; color: rgb(0, 0, 0);">Does anyone know if there is anything special you have to do to make calls from an SCCP phone on one SRST router to a SIP endpoint on another SRST router work?<br><br>Here's what I have and can do:<br><ul><li>two routers in SRST mode</li><li>all phones register properly, some to one router, some to another</li><li>I can make a call from phone A on router A to phone B on router B (and vice versa)<br></li><li>I can make a call from phone A on router A to Unity Express A on router A and be transferred to phone B on router B</li></ul>I can NOT place a call from phone A on router A to Unity Express B on router B.<br><br>I'm pretty sure Router B is getting the call, because a "debug voice dialpeer all" started spewing out stuff on Router B like it was going out of style. It even showed matches. I can post the full debug next week, but just thought there would be a quick(?) answer.<br><br>I think these are the relevant configs, but will post more if needed:<br><br><div style="margin-left: 40px;"><hr style="width: 100%; height: 2px;">Router A:<br>
!<br>
dial-peer voice 37063 voip<br> description Cisco Unity Express AutoAttendant (Default)<br> destination-pattern 37063<br> session protocol sipv2<br> session target ipv4:10.104.13.66<br> dtmf-relay sip-notify<br> codec g711ulaw<br> no vad<br>!<br>dial-peer voice 11111 voip<br> description Wild Card to vgw-jnhn-b<br> destination-pattern [1234567]....<br> session target ipv4:10.104.13.202<br>!<br><hr style="width: 100%; height: 2px;">Router B:<br>!<br>dial-peer voice 37073 voip<br> description Cisco Unity Express AutoAttendant (Default)<br> destination-pattern 37073<br> session protocol sipv2<br> session target ipv4:10.104.13.70<br> dtmf-relay sip-notify<br> codec g711ulaw<br> no vad<br>!<br>dial-peer voice 11111 voip<br> description Wild Card to vgw-jnhn-a<br> destination-pattern [1234567]....<br> session target ipv4:10.104.13.201<br>!<br><hr style="width: 100%; height: 2px;"></div><br><br><br><br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><br></div><br>_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
</div><br>_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
</div></body></html>