<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>cool. i'll try that debug....<br><br>i tried a debug TFTP and all i got was TFTP attempts, nothing else.<br><br>this will hopefully confirm that it is indeed a TFTP issue. at least i can start with that.<br><br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><br><br>----- Original Message -----<br>From: "Erick B." <erickbee@gmail.com><br>To: "Lelio Fulgenzi" <lelio@uoguelph.ca><br>Cc: "cisco-voip voyp list" <cisco-voip@puck.nether.net><br>Sent: Saturday, March 27, 2010 10:42:20 PM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] FXO ports and registering with CCM<br><br>Try doing a debug ccm-manager config-download and see if you can<br>notice a problem with the commands being applied, etc. Usually it<br>lists the bad commands in the show ccm output but looks like nothing<br>is in that part of output you posted.<br><br>The CUCM having an IP address listed for the ports indicates these<br>ports were registered at some point recently....<br><br><br>On Sat, Mar 27, 2010 at 7:27 PM, Lelio Fulgenzi <lelio@uoguelph.ca> wrote:<br>> I've finished configuring a couple of FXO port (with Ground Start) and CUCM<br>> has an IP address for the ports, but they're not registered yet. I have put<br>> the appropriate MGCP and ccm-manager commands based on another router and<br>> CCO documents.<br>><br>> I have two questions:<br>><br>> should these ports register unplugged or do I have to plug in the trunk line<br>> before they will register?<br>> I noticed some TFTP errors on the MGCP status, I'm thinking that's not good<br>> (see below config)<br>><br>> ________________________________<br>> !<br>> voice-port 0/2/0<br>> signal groundStart<br>> !<br>> voice-port 0/2/1<br>> signal groundStart<br>> !<br>> ccm-manager fallback-mgcp<br>> ccm-manager mgcp<br>> ccm-manager config server 10.104.91.105<br>> ccm-manager config<br>> !<br>> mgcp<br>> mgcp call-agent 10.104.91.105 2427 service-type mgcp version 0.1<br>> mgcp fax t38 ecm<br>> mgcp bind control source-interface Loopback104<br>> mgcp bind media source-interface Loopback104<br>> mgcp behavior g729-variants static-pt<br>> !<br>> mgcp profile default<br>> !<br>> dial-peer voice 9020 pots<br>> service mgcpapp<br>> port 0/2/0<br>> !<br>> dial-peer voice 9021 pots<br>> service mgcpapp<br>> port 0/2/1<br>> !<br>> ________________________________<br>> vgw-jnhn-a#show ccm-manager config-download<br>> Configuration Auto-Download Information<br>> =======================================<br>> No configurations downloaded<br>> Current state: Downloading XML file<br>> Configuration Download statistics:<br>> Download Attempted : 1<br>> Download Successful : 0<br>> Download Failed : 0<br>> TFTP Download Failed : 3<br>> Configuration Attempted : 0<br>> Configuration Successful : 0<br>> Configuration Failed(Parsing): 0<br>> Configuration Failed(config) : 0<br>> Last config download command:<br>> Configuration Error History:<br>> ________________________________<br>> ---<br>> Lelio Fulgenzi, B.A.<br>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>> Cooking with unix is easy. You just sed it and forget it.<br>> - LFJ (with apologies to Mr. Popeil)<br>><br>><br>> _______________________________________________<br>> cisco-voip mailing list<br>> cisco-voip@puck.nether.net<br>> https://puck.nether.net/mailman/listinfo/cisco-voip<br>><br>><br></div></body></html>