<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
We are in the process of implementing a recording device in our Public
Safety Department. This will replace an old system that was used with
POTS lines only.<br>
<br>
We have CUCM 7.1.2 with 79xx phones. Eight VoIP phones in Public
Safety will each have only 2 lines on each of the 6 buttons that need
to be recorded.<br>
<br>
We know that we can place a coupler on each phone to play the Pa state
required beep tone. Anyone familiar with any other way to play a beep
tone - only for the lines that are going to be recorded? If we place
the coupler on the handset the beep will play for all lines - even
those not recorded. We would like to avoid the beep for lines not being
recorded if possible.<br>
<br>
Thanks....Lisa<br>
<div class="moz-signature">-- <br>
<img src="cid:part1.04010207.02040801@scranton.edu" border="0"></div>
</body>
</html>