I tried 723 for the region and got fast busies for calls to the 6608.... <br><br><div class="gmail_quote">On Wed, Apr 21, 2010 at 3:17 PM, Peter Slow <span dir="ltr"><<a href="mailto:peter.slow@gmail.com">peter.slow@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Ryan,<br>
I had mentioned to him that configuring the phone to always use a<br>
TRP and then configuring the TRP to support the approriate codecs<br>
might do the trick, but havent tried it yet. the other option was<br>
setting the region between the 6608 and the phone to 723 to force<br>
transcoder invocation, but that seemed messy.<br>
<br>
any comments on either solution?<br>
<br>
-Pete<br>
<div><div></div><div class="h5"><br>
On Wed, Apr 21, 2010 at 2:15 PM, Ryan Ratliff <<a href="mailto:rratliff@cisco.com">rratliff@cisco.com</a>> wrote:<br>
> In order to force a codec you have to route the call through a device that<br>
> only supports said codec. In your case both the 6608 and the phone support<br>
> g.729 so that is what CUCM is negotiating. Since you can't disable g.729<br>
> support on the phone you would need to somehow route the call through and<br>
> intermediate device that only supports ilbc (for the phone leg) and then<br>
> engage a transcoder to convert the ilbc to g.711 going to the 6608.<br>
> Remember the Region setting is just the max bandwidth for calls. Any codec<br>
> less than (or equal to) the max and supported by all parties will be<br>
> allowed.<br>
> -Ryan<br>
> On Apr 21, 2010, at 12:56 PM, Jonathan Charles wrote:<br>
><br>
> Basically, the goal is to Force iLBC for all calls from the remote phones...<br>
> and invoke the transcoder regardless of codec support.<br>
><br>
><br>
> Jonathan<br>
><br>
> On Wed, Apr 21, 2010 at 11:22 AM, Jonathan Charles <<a href="mailto:jonvoip@gmail.com">jonvoip@gmail.com</a>><br>
> wrote:<br>
>><br>
>> OK, I have a 6608 and a 7965 remotely over a VPN.<br>
>><br>
>> I have enabled an IOS Enhanced Xcoder... It is never invoked. The region<br>
>> says G.728/ILBC and it is set to lossy...<br>
>><br>
>> And all calls are going out as G.729...<br>
>><br>
>> The 6608 doesn't support ilbc, but the 65 does... I have enabled the<br>
>> service parameters:<br>
>><br>
>> iLBC Codec Enabled: Enabled for all devices<br>
>> Default InterRegion Codec: G.728<br>
>><br>
>> But still 729...<br>
>><br>
>> The quality is horrible using 729... the customer is demanding ilbc (that<br>
>> is why they bought the 7965s and 62s....) but if the phone will always<br>
>> default to 729...<br>
>><br>
>><br>
>> How???<br>
>><br>
>><br>
>><br>
>> Jonathan<br>
><br>
> _______________________________________________<br>
> cisco-voip mailing list<br>
> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
><br>
><br>
> _______________________________________________<br>
> cisco-voip mailing list<br>
> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip" target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
><br>
><br>
</div></div></blockquote></div><br>