<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Verdana; font-size: 10pt; color: #000000'>Thanks for clearing that up Bill. I think some of us (definitely me) read that a bit quicker than we should have. It's also helpful to know you need a physical address for transcoder/CFB configuration.<br><br>Now, do you mean physical IP address?<br><br>---<br>Lelio Fulgenzi, B.A.<br>Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1<br>(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)<br>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<br>Cooking with unix is easy. You just sed it and forget it. <br> - LFJ (with apologies to Mr. Popeil)<br><br><br>----- Original Message -----<br>From: "Bill" <bill@hitechconnection.net><br>To: "Dschulz" <dschulz@skyline-ats.com>, "Peter Slow" <peter.slow@gmail.com><br>Cc: "cisco-voip voyp list" <cisco-voip@puck.nether.net><br>Sent: Monday, April 26, 2010 7:58:45 AM GMT -05:00 US/Canada Eastern<br>Subject: Re: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DIDcard<br><br>I didn't say you couldn't use it in you sccp bind statement. I said you<br>couldn't use it for a transcoder / CFB configuration. <br><br>-----Original Message-----<br>From: Dschulz [mailto:dschulz@skyline-ats.com] <br>Sent: Sunday, April 25, 2010 8:56 PM<br>To: Peter Slow; Bill<br>Cc: cisco-voip voyp list<br>Subject: RE: [cisco-voip] MAC address for SCCP controlled<br>VIC3-2FXS-E/DIDcard<br><br>The loopback can be used and is preferable to use it. However, you need to<br>make sure it is included in your routing table.<br><br>Dave<br><br><br>-----Original Message-----<br>From: Peter Slow <peter.slow@gmail.com><br>Sent: Sunday, April 25, 2010 5:32 PM<br>To: Bill <bill@hitechconnection.net><br>Cc: cisco-voip voyp list <cisco-voip@puck.nether.net><br>Subject: Re: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID<br>card<br><br>Since when can't you use a loopback interface is your SCCP bind<br>interface? I'm not aware of that limitation.<br><br>-Peter<br><br>On Fri, Apr 23, 2010 at 11:34 AM, Bill <bill@hitechconnection.net> wrote:<br>> I don't think you can use a loopback for this. If I remember right this is<br>> the same as setting up a transcoder / conference bridge resource and you<br>> have to use a physical adaptor.<br>><br>><br>><br>> ________________________________<br>><br>> From: Lelio Fulgenzi [mailto:lelio@uoguelph.ca]<br>> Sent: Friday, April 23, 2010 10:30 AM<br>> To: Bill<br>> Cc: cisco-voip voyp list<br>> Subject: Re: [cisco-voip] MAC address for SCCP controlled VIC3-2FXS-E/DID<br>> card<br>><br>><br>><br>> hmmm, i'm going to be using a loopback address.<br>><br><br><br>[The entire original message is not included]<br><br>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br>https://puck.nether.net/mailman/listinfo/cisco-voip<br></div></body></html>