<HTML>
<HEAD>
<TITLE>Re: [cisco-voip] Caller ID Override</TITLE>
</HEAD>
<BODY>
<FONT SIZE="4"><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:14.0px'><B>Thanks All. That’s what I figured but was hoping that one of you geniuses — and you know who you are — out there had figured out a way around that. I’ve already contacted Qwest/CenturyLink/Whoever-They’ll-Be-Tomorrow to see if they can assign the same caller ID DN to all of the lines in the hunt group. They’ve already got the calling name screwed up so perhaps they can do that while they’re fixing the name.<BR>
</B></SPAN></FONT></FONT><FONT FACE="Verdana, Helvetica, Arial"><B><FONT SIZE="2"><SPAN STYLE='font-size:10.0px'>-- <BR>
Jim Reed<BR>
Manager of Technical Services<BR>
Swift Communications, Inc.<BR>
970-384-9141 (Direct)<BR>
775-772-7666 (Cell)<BR>
</SPAN></FONT></B><SPAN STYLE='font-size:12.0px'><BR>
<BR>
<BR>
On 4/27/10 6:11 PM, "Bill Riley" <bill@hitechconnection.net> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'>As Jim said you can't send out CLID info on FXO ports. You don't have<BR>
control only TELCO<BR>
<BR>
-----Original Message-----<BR>
From: cisco-voip-bounces@puck.nether.net<BR>
[<a href="mailto:cisco-voip-bounces@puck.nether.net]">mailto:cisco-voip-bounces@puck.nether.net]</a> On Behalf Of Mark Rudholm<BR>
Sent: Tuesday, April 27, 2010 6:43 PM<BR>
To: Jim Reed<BR>
Cc: cisco-voip voyp list<BR>
Subject: Re: [cisco-voip] Caller ID Override<BR>
<BR>
You can't override CID on calls sent out an analog phone line.<BR>
<BR>
You might be able to get your telco to present the billing number<BR>
as the CID for all your lines but you can't set it yourself the<BR>
way you can with a PRI.<BR>
<BR>
-Mark<BR>
<BR>
Jim Reed wrote:<BR>
> Anyone have any suggestions for overriding caller ID number on analog<BR>
lines<BR>
> connected to fxo ports? I've tried putting the number in every place I<BR>
can<BR>
> find calling party transform mask but to no avail. Any suggestions<BR>
> gratefully appreciated. Right now it's sending the number of the<BR>
individual<BR>
> lines in the hunt group -- depending on which one is available when you<BR>
make<BR>
> the outbound call.<BR>
> Thank You...<BR>
<BR>
_______________________________________________<BR>
cisco-voip mailing list<BR>
cisco-voip@puck.nether.net<BR>
https://puck.nether.net/mailman/listinfo/cisco-voip<BR>
<BR>
<BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:12.0px'><BR>
<BR>
</SPAN></FONT>
</BODY>
</HTML>